![]() | Home > Maintenance & Mods (L322) > Loadspace Floor Cover Clips |
![]() ![]() |
|
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1543 ![]() ![]() |
Both the clips on my loadspace floor have broken. I tried repairing one by building it up with ABS dissolved in acetone. It worked for a few months but has borken again, as has the other one.
|
||||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35481 ![]() ![]() |
dont know the part number but i replaced the broken bit with a nut and bolt when mine broke..worked ok. |
||
![]() |
|
rvbush Member Since: 08 Jan 2016 Location: Leamington Spa Posts: 544 ![]() ![]() ![]() |
I think you'll find the part number is the number moulded on it: 51478251276
|
||
![]() |
|
garyRR Member Since: 13 Mar 2021 Location: Hampshire Posts: 1480 ![]() ![]() |
Advanced Factors sell this piece. 2015 Range Rover Autobiography 4.4 SDV8 |
||
![]() |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1543 ![]() ![]() |
Thanks chaps. I hadn’t thought of a bolt.
|
||
![]() |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1543 ![]() ![]() |
My goodness! I searched on that part no. There's no way I'd pay what is being asked, even on evilbay (between A$100 and A$200 each including shipping). I can fabricate two from steel and they will never break again. Ron B. VK2OTC
|
||
![]() |
|
JCW Member Since: 13 Apr 2013 Location: Cotswolds Posts: 883 ![]() ![]() ![]() |
There’s a forum member on here, RRYorks, who can 3D print these, he made a pair up for me for a previous L322 I had about a year ago, at a very reasonable cost.
|
||
![]() |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1543 ![]() ![]() |
Thanks JCW. Found it: https://www.fullfatrr.com/forum/topic56879.html Ron B. VK2OTC
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)