Home > Technical (L405) > Kph Speedo |
|
|
comports Member Since: 20 Dec 2010 Location: Colchester Posts: 1698 |
Hey El Cid,
|
||
28th Aug 2022 11:33am |
|
Alistair Member Since: 11 Feb 2011 Location: Peterborough / Bordeaux / Andorra Posts: 7926 |
Mine will only change the small digital speed readout to KPH, the numbers around the outside of the dial always stay MPH.
|
||
29th Aug 2022 8:27am |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8516 |
Mine can swap the main dial as well as the digital readout on a MY16. Must have been an update at some point. There is nothing that can't be fixed with a hammerππ
|
||
29th Aug 2022 11:07am |
|
Bora20 Member Since: 03 Mar 2021 Location: Kamloops, BC Posts: 236 |
Mine allows both. Might be a π¨π¦ or North American setting. Dan. π¨π¦ 2013 L405 5.0 SCV8 |
||
29th Aug 2022 2:25pm |
|
Andy S Member Since: 16 Jun 2013 Location: Sevenoaks Posts: 1020 |
I have a 16 MY too, and can get both, as above. |
||
29th Aug 2022 3:23pm |
|
Bill Member Since: 18 Nov 2017 Location: Essex / Normandy Posts: 1231 |
Iβm not sure if applicable , but at one point , the lamps needed a physical switch pushing. Could be found by each headlight.. My car in 2007 was left and right The next was 2012 was push , and it sprang back , so you had no idea if it was for the U.K. or the eu 2016 was electronic & on the dash menu. Filters are in fact so good that in certain circumstances, when the ambient air is already polluted, a diesel car will tend to extract more particles from the air than it emits. Emissions Analytics worked with........etc etc He who dies with the most toys wins... |
||
29th Aug 2022 3:32pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis