Anyone got any tips on programming the deployable tow hitch.
Mines has been in the dealership twice and no hope there, they have no idea.
I mate has JLR SSD and let me try.
I enable the deployable towbar and module and it updated but I must have missed something as I still see nothing but the hitch guidance.
Any help before I try again?

this is from our wiki,

https://www.fullfatrr.com/forum/topic57054.html ... - .- -.




Y. O. L. O.
.

Thanks for that, I have see it before.
It’s the lld and cff bit I am missing.
Mine all works but no information on the dash.

Managed to get this coded and found it did not see the Iforwiliams trailer with led lights.
Got most sorted but the indicators need more resistance.

Up date on this, it was coded the first time but it did no see my trailer as it has led lights.
Hard wired a temporary bulb on the indicators and bingo, tow assist comes up and parking sensors off etc.
I still don’t get the trailer symbol in the cluster so working on that.
I have now swapped the 13 pin electrics for an after market one from towtrust.
Part number 29190516CR , it comes with its own Led module.
This now works with the led lights with no resister needed.