Battery: How low to get faults displayed? | |
For a while I have been getting on and off some faults showing up for about 5 seconds after start, then going away. Usually its "Transmission fault reduced traction" and "HDC off" etc. Drives fine. Today had "suspension fault-max speed 30" followed by lowering to bump stops. Turned off, restarted and been fine for the rest of the 80 mile journey.
Before leaving, battery read 11.9v, when running 14.7 and when I got back with engine off 12.4-12.3.
Volts drop to 11.6 when cranking.
Is that the likely cause of faults flashing up?
New battery time (it is from August 2017).
Thanks
|