Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > Oil Cooler Filter Housing 3.6 TDV8 - Is there a gasket here?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Superspoons



Member Since: 24 Jun 2010
Location: East Hertfordshire, UK
Posts: 393

England 2006 Range Rover Vogue SE 4.2 SC V8 Zambezi Silver
Oil Cooler Filter Housing 3.6 TDV8 - Is there a gasket here?

Hi all,

Can anyone confirm if there is a gasket between the cooler and the 'base' of the Oil Cooler Filter Housing on a 2010 3.6 TDV8 as shown in the pic below?

I know there's one for the whole assembly, but I have a coolant leak at the back to the 'V' which I'm trying to locate. Thermostat housing replaced and the Hose Assembly/Hoses all checked and appear fine - pressure test next - but just wondered about the gasket.....




UPDATE:

I may have answered my own question ? Just found this image on Ebay and to me ... Id say there was something there ....
?




Thanks, Gavin Gavin

2005 Range Rover Vogue SE 4.2 Supercharged V8

Follow my 4.2 Supercharged antics -
https://www.fullfatrr.com/forum/topic63354.html
https://www.instagram.com/l322_supercharged/
https://www.youtube.com/channel/UC8ChHNSdscnJarKjBLd_IAg

Post #610407 26th Oct 2021 11:59am
View user's profile Send private message View poster's gallery Reply with quote
GraemeS



Member Since: 06 Mar 2015
Location: Wagga area
Posts: 2485

Australia 2012 Range Rover Autobiography TDV8 Bournville

Yes there is a gasket but like the TDV6's cooler I haven't seen any reference for the gasket indicating that the gasket isn't available as a spare part, whereas the equivalent gasket for the 4.4's cooler is available as a spare part even though it wasn't initially.

Post #610484 26th Oct 2021 8:19pm
View user's profile Send private message View poster's gallery Reply with quote
Superspoons



Member Since: 24 Jun 2010
Location: East Hertfordshire, UK
Posts: 393

England 2006 Range Rover Vogue SE 4.2 SC V8 Zambezi Silver

Thanks for confirming GraemeS Thumbs Up I asked Duckworth Parts this morning and yes, no gasket shown/available on Microcat.

I'll take it apart and take a look / reseal with an appropriate sealant. I've also just ordered LR002340 (the main gasket between the housing and engine) - there's really no point not doing it whilst I'm this far in and got it all apart.

 Gavin

2005 Range Rover Vogue SE 4.2 Supercharged V8

Follow my 4.2 Supercharged antics -
https://www.fullfatrr.com/forum/topic63354.html
https://www.instagram.com/l322_supercharged/
https://www.youtube.com/channel/UC8ChHNSdscnJarKjBLd_IAg

Post #610561 27th Oct 2021 9:55am
View user's profile Send private message View poster's gallery Reply with quote
GraemeS



Member Since: 06 Mar 2015
Location: Wagga area
Posts: 2485

Australia 2012 Range Rover Autobiography TDV8 Bournville

When I changed my 4.4's gaskets I coated the new middle gasket with a high temperature silicone sealant. If your gasket doesn't disintegrate then perhaps that's an option for you.

Note that Microcat doesn't show the 4.4's gasket as a distinct item but now it is available so don't just rely on Microcat.

Post #610691 27th Oct 2021 8:29pm
View user's profile Send private message View poster's gallery Reply with quote
Superspoons



Member Since: 24 Jun 2010
Location: East Hertfordshire, UK
Posts: 393

England 2006 Range Rover Vogue SE 4.2 SC V8 Zambezi Silver

Yes - I'll need to drop some of its oil and coolant though as I can imagine the two will mix if I removed just the cooler on its own.

I've bought some Granville Instant Gasket for this -

https://www.halfords.com/tools/garage-equi...TcEALw_wcB

I'm aiming to write this up for all fellow 3.6 owners who may need to do this in the future Gavin

2005 Range Rover Vogue SE 4.2 Supercharged V8

Follow my 4.2 Supercharged antics -
https://www.fullfatrr.com/forum/topic63354.html
https://www.instagram.com/l322_supercharged/
https://www.youtube.com/channel/UC8ChHNSdscnJarKjBLd_IAg

Post #610726 28th Oct 2021 8:00am
View user's profile Send private message View poster's gallery Reply with quote
jonminns



Member Since: 07 Mar 2011
Location: Leicestershire, UK
Posts: 155

United Kingdom 2008 Range Rover Vogue TDV8 Santorini Black

Pretty sure it’s 002342 - between the cooler and the base looking at the parts invoice from when I did this.
 2008/58 FFRR 3.6 TDV8 Vogue

Post #614813 5th Dec 2021 10:54am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site