Just noticed Seal has small slight "lift" to it, see pics. Not sure if frost has got underneath or it was always like since I bought it. No sign of any ingress, what's best fix? Can wait till it's warmer and maybe push down but it's cold and maybe brittle at the mo. Can run some sealant along it then? Any tips appreciated.

Looks like it’s been caught on something at some point, or it’s been through the monkey enclosure at a safari park......

It seems to have some discolouration so I would imagine it’s been like that a while, if it’s not leaking then I wouldn’t worry too much about getting it done today, just make sure your sun roof drains are clear so any water which does get in is able to flow away. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2010 LR D4 Commercial 2.7 TDV6

Thanks, Yes I thought it looks like a snag somewhere. Is the Seal replaceable or is it best just to "patch" up? 2009 Range Rover Vogue 3.6TDV8, Bournville, Parchment/Navy
2005 Jaguar XJ350 3.0 V6 Sovereign, Jaguar Racing Green, Ivory
1997 TVR Chimaera 450, Formula Red, Grey

i should imagine it would be a lot of work to replace that seal, i would dry it out and glue or put sealant in it... ... - .- -.




Y. O. L. O.
.

Thanks, yes looks a bit of a specialist/expensive job, will sort out when temperature increases! 2009 Range Rover Vogue 3.6TDV8, Bournville, Parchment/Navy
2005 Jaguar XJ350 3.0 V6 Sovereign, Jaguar Racing Green, Ivory
1997 TVR Chimaera 450, Formula Red, Grey

Hi Ricardo,

I had the same issue on my L322 when I carelessly backed out from under a partially closed garage door with the sunroof tilted.

The sunroof glass itself has a triangular section bonded onto the edge of the glass to which the seal is slotted - see the attached diagrame.

WIth the roof tilted, clean around the exposed parts and you should be able to push the seal back into place - do it on a warm day, though! (actually, this is a serious comment - the surrounding seal is quite stiff, so to avoid damage it would be better on a warm day)

Good luck!

W.

 2017 - L405 SC - WOW! just WOW!
2014 - L405 4.4
2010 - L322 3.6 - Carried me 100,581 miles then broke big-time

There are 10 types of people in this world;
Those that understand binary,
and those that don't.

W, thanks for tip and diagram, very helpful. Will give it a go on a warm day, whenever that will be 🌞 2009 Range Rover Vogue 3.6TDV8, Bournville, Parchment/Navy
2005 Jaguar XJ350 3.0 V6 Sovereign, Jaguar Racing Green, Ivory
1997 TVR Chimaera 450, Formula Red, Grey

A carefully used hairdryer, with a cloth to protect paint etc should get you out of trouble !

Laurie

I’ll try that myself as mine has a little lift on the seal too
 Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Yes definitely worth a go. Probably will add bit of sealant too to help ! I've used a mouldable glue called Sugru before to seal things, is very handy stuff. 2009 Range Rover Vogue 3.6TDV8, Bournville, Parchment/Navy
2005 Jaguar XJ350 3.0 V6 Sovereign, Jaguar Racing Green, Ivory
1997 TVR Chimaera 450, Formula Red, Grey

Anyone had any luck sorting this seal? Just noticed mine is exactly the same as Ricardo’s. 2011MY 4.4TDV8 Autobiography Baltic Blue
TVR Griffith
Alfa Romeo Mito QV

Been lazy so Actually haven't done mine yet! Got some sugru so will have a go and advise how it goes. 2009 Range Rover Vogue 3.6TDV8, Bournville, Parchment/Navy
2005 Jaguar XJ350 3.0 V6 Sovereign, Jaguar Racing Green, Ivory
1997 TVR Chimaera 450, Formula Red, Grey