fullfatrr.com - View topic - Oils at front side??

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Mods (L322) > Oils at front side??

Page 1 of 1

Print this entire topic ·

umitbat

Member Since: 06 Jan 2010
Location: Space
Posts: 433

Oils at front side??

Hi
I did oil changes today and noticed these around cartel and hroug the engine.

This one is left side looking to the back of the car.

Click image to enlarge

This hose right side of oil kartel looking back

And also around front differential plus transfer case.
Transfer case has minor leaks around marked points.

Click image to enlarge

Any comments appreciated. 2010 3.6tdv8 180k km.
sold 06 td6 160k
Sold 03 td6 260k

7th Mar 2021 1:32pm

umitbat

Member Since: 06 Jan 2010
Location: Space
Posts: 433

And just in front of transmission oil cartel:(

Click image to enlarge

2010 3.6tdv8 180k km.
sold 06 td6 160k
Sold 03 td6 260k

7th Mar 2021 1:37pm

northernmonkeyjones

Member Since: 24 Mar 2012
Location: derby
Posts: 8526

2016 Range Rover Autobiography SDV8 Santorini Black

The transfer case doesn’t look too drastic. I would check around the output shaft seal, the solenoid and the high low position sensor, these are the only open points apart from the filler and drain. If they all look Ok then it could be the mastic seal which joins the 2 halves. But that’s more trouble than it’s worth as the case has to come out and unless it’s really peeing out then I wouldn’t worry.

My trans case on my 07 3.6 was leaking for ages, LR re sealed it, still leaking, I eventually tracked it down to a fouled O ring on the high low sensor, cheap and easy fix in the end..... and doable on the drive in 5 mins.... so worth checking. It’s about the only thing high up on the case so if it looks like it’s running down then start there.

The rest look like they start high up so look from the top with the covers off. Could be rocker gaskets. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

7th Mar 2021 2:20pm

umitbat

Member Since: 06 Jan 2010
Location: Space
Posts: 433

Great info thanks
Does the leak cause too much fluid loss?
Is o ring easy to find? 2010 3.6tdv8 180k km.
sold 06 td6 160k
Sold 03 td6 260k

7th Mar 2021 2:59pm

northernmonkeyjones

Member Since: 24 Mar 2012
Location: derby
Posts: 8526

No not much, the case was damp but no drips. The o ring is on the High low position sensor which is a small black unit secured to the case with some wires into it. This is the sensor you can see the damage to the o ring.

Whole new sensor wasn’t too much money, and doesn’t need coding. You could try replacing just the seal if that is where it is coming from. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

7th Mar 2021 5:23pm

umitbat

Member Since: 06 Jan 2010
Location: Space
Posts: 433

I checked the engine for oil leak only things I could find are :

Click image to enlarge

Any ideas what the little hose there?Is it the one coming from air filter?
That is Left side of oil filter looking back.

and a moistured pipe; fuel line I guess:

Click image to enlarge

The one at the bottom.only this one is like this. 2010 3.6tdv8 180k km.
sold 06 td6 160k
Sold 03 td6 260k

10th Mar 2021 6:12pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum