Hi all, i have just swap over my black spoke covers with the later silver ones on my steering wheel, on removing the air bag i have noticed that the 2010 switches have the same plugs apart from the 2010 have one more plug.
Now i was told that the 2010 switches do not work on the pre touch screen cars.
has any one ever tried the new switches as they have the same plugs and the same colour wires on them. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

What happens when you plug them in? 

was tempted but thought i would ask just in case i done damage, was expecting it to be completely different but it was very much the same V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

I'd be interested to know if they work, however I can't offer any useful advice/suggestions as to who might know

Sounds like it should be fine 2008/58 FFRR 3.6 TDV8 Vogue

Do the 2010 switches work on touch screen cars Dave? Used to have:
2005 FFRR 4.4 Vogue - BRC LPG Conversion & Remapped

Now have:
2008 SSRR 3.6 TDV8 - HSE and plenty of toys

i would think so as i was told they are canbus and for the later cars, but hopefully tomorrow i will try them on the pre touch screen, i am hope full as the plugs and wire colour as the same. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

ok, i got a chance to try the 2010 switches on my car, they have the same plugs and even the same colour wires but they dont work, none of the controls are recognised. i did have high hopes..well now i am looking for a black box that i came across on the internet some time ago, it took canbus commands and converted them into ibus commands, it was programmed by you pc to send a pre programmed ibus code went it see a canbus command. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster