Hi, I know not everyone likes them, but I have been debating now for over a year, whether to fit the bullbar that I have, and after seeing another Range Rover like mine but with one fitted, I have decided it is going on. Has anyone got or know where I could get the fitting instructions please?

I have the 2002-2005 Range Rover Soft A Bar.

Thank you.

have you tried topix? Its definitely on topix in the free section, ive just looked  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2010 LR D4 Commercial 2.7 TDV6

Last edited by northernmonkeyjones on 3rd Sep 2018 6:35pm. Edited 1 time in total

I’m sure, we’ll, I know, they are in RAVE which I uninstalled when I traded my TD6.

Someone must have it on their PC.....

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

if the OP PMs me his email I will fire it over. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2010 LR D4 Commercial 2.7 TDV6

green-oval-nut wrote:

Hi, I know not everyone likes them, but I have been debating now for over a year, whether to fit the bullbar that I have, and after seeing another Range Rover like mine but with one fitted, I have decided it is going on. Has anyone got or know where I could get the fitting instructions please?

I have the 2002-2005 Range Rover Soft A Bar.

Thank you.

In Rave under"Accessory Fitting Instructions"-"Modular Wraparound" and "Modular A Frame"

Click image to enlarge

I have them on my 04 - look great IMHO but were obviously fitted by a Clown that simply gave up once they were loosely attached - I spent hours fitting them correctly where several bolts were simply not fitted. Downside is after having her cleaned at the local hand wash the rubber finish attracts every bit of fluff under the sun when they wipe them over - going over them with sticky tape has them looking like new though!

Thank you everyone for your replies. I forgot all about topix, I will register in a minute. And PM coming for the RAVE offer. Thank you. And my A bar is different to the one in the picture. Cheers though.

Why do you want bull bars?
You have a kangaroo problem near you?
They are lethal to motorcyclists and pedestrians.
I am massively against them.
You want to make sure that if a child steps out in the road in front of you to inflict lethal injury?

🤬🤬🤬

rave is in the wiki...



I'm also against bull bars and i think they may well be illegal now...

https://assets.publishing.service.gov.uk/g...l-bars.pdf

Metal bars are illegal, rubber ones are not. Couldn’t give a damn what people think about me fitting one. Cheers to everyone else who had helpful comments. Those with opinions should just go and write there opinions on posts that ask for them! This was not an opinion requesting post!

nicedayforit wrote:

https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/429995/bull-bars.pdf

I have been hunting and hunting through the Rave. Still can’t find fitting instructions lol.

Must admit to not knowing that Bull Bars were so lethal - always thought that the 2.7 tons of metal bolted behind them had some influence on the outcome?

If anything, by fitting the rubber bull bar, I would be softening the impact if someone or something had the misfortune of coming into contact with the front of my car. I know what I would prefer to be hit by, the nudge bar, not the solid bonnet or grill that could shatter and pearce the body! But someone is more likely to meet my fist than my bonnet 😂