Home > Technical (L322) > height sensor |
|
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
someone asked me that if you take off and refit a height sensor , will it read differently and need adjusting, anyone know?... ... - .- -.
|
||
11th Jul 2018 11:29am |
|
PaulTyrer Member Since: 22 Jul 2013 Location: Devizes, Wiltshire Posts: 1233 |
Stan
|
||
11th Jul 2018 12:20pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
thanks paul ... - .- -.
|
||
11th Jul 2018 12:57pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6405 |
Didn't have to when I changed a rear one, may just have been lucky, or depends on how fussy you are about a movement of 2mm in height .
|
||
11th Jul 2018 12:57pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
is that all the difference will be Tim? ... - .- -.
|
||
11th Jul 2018 1:03pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6405 |
I didn't see any height difference when I changed mine, just indicating that an anal factor might tempt the iiDTool out of its box .
|
||
11th Jul 2018 1:11pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
... - .- -.
|
||
11th Jul 2018 1:54pm |
|
MikeO Member Since: 02 Jan 2018 Location: The Cotswolds Posts: 513 |
Shouldn't do - it's just a potentiometer. If it's the same sensor then I'd be surprised if removing / refitting makes any difference. Fitting a new sensor and I'd expect to carry out a re-calibration. 2016 Skoda Octavia VRS Estate
|
||
11th Jul 2018 4:32pm |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis