Home > Technical (L322) > webasto |
|
|
Norway Member Since: 09 Dec 2012 Location: Høvik Posts: 123 |
Hi
|
||
14th Jan 2014 3:37pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35265 |
search 'fbh' or 'fuel burning heater' or have a look in the wiki.... |
||
14th Jan 2014 3:43pm |
|
Katash Member Since: 10 Apr 2011 Location: Hereford Posts: 700 |
Front LHS behind wheel arch liner - easy to access, moderately easy to remove and reinstall |
||
14th Jan 2014 7:05pm |
|
Norway Member Since: 09 Dec 2012 Location: Høvik Posts: 123 |
Hi
|
||
15th Jan 2014 7:22am |
|
Norway Member Since: 09 Dec 2012 Location: Høvik Posts: 123 |
The webasto turns on every time I park, but turns off again after 1 minute.
|
||
15th Jan 2014 10:24am |
|
jak480 Member Since: 06 Dec 2013 Location: Degernes Posts: 44 |
Looks like a typical webasto ecu problem
|
||
15th Jan 2014 10:36am |
|
Norway Member Since: 09 Dec 2012 Location: Høvik Posts: 123 |
Sure, that would be great.
|
||
15th Jan 2014 10:38am |
|
Norway Member Since: 09 Dec 2012 Location: Høvik Posts: 123 |
Back to the webasto topic.
|
||
14th Jan 2018 10:52am |
|
Dolphinboy Member Since: 07 Dec 2009 Location: Bristol Posts: 3136 |
Sounds like it is not firing up. Do you hear the fan start up when you open your door? If so then it is your (pcb?) card - the electronic circuit board. Needs refurb or replacing. Best guy is mike on the Rover 75 site. The contact details are on here somewhere. Search FBH |
||
14th Jan 2018 11:49am |
|
Norway Member Since: 09 Dec 2012 Location: Høvik Posts: 123 |
yeah. it fires up. Ill check the pcb -03V td6
|
||
14th Jan 2018 2:23pm |
|
Dolphinboy Member Since: 07 Dec 2009 Location: Bristol Posts: 3136 |
If it is firing up then The glow plug must be working and it may be too coked up to continue so a de-coke May be in order. These bits of kit do produce a lot of soot apparently. |
||
14th Jan 2018 7:02pm |
|
Norway Member Since: 09 Dec 2012 Location: Høvik Posts: 123 |
Hi Dolphinboy
|
||
16th Jan 2018 5:37am |
|
Dolphinboy Member Since: 07 Dec 2009 Location: Bristol Posts: 3136 |
Not an expert on these by any means but the exhaust tube and general burn area gets full of soot after a while and needs cleaning out as it impedes burning of the fuel and causes an early cessation/fault. |
||
16th Jan 2018 8:08am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis