Advertise on fullfatrr.com »

Home > Technical (L322) > Does my headlight conversion need relays ?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
fisha



Member Since: 25 Sep 2009
Location: Scotland
Posts: 1369

2015 Range Rover Autobiography SDV8 Aruba
Does my headlight conversion need relays ?

I have a 2010 conversion on my car ( done before I bought it ), and now the RH front indicator has stopped blinking.

Now, have a little look at the wiring, it appears that the lights have been fitted via the use of relays .. there are 2 fixed near to each of the lights. I can hear one of the relays clicking when the indicator should be lighting. (goodness knows what the other relay is for! ). There are also some resistors attached near to the relays.

The other thing with my lights is that the little LED side lights are on all the time ... and so are the headlights unless you have it set at the side-light position. It does my head in.

But its got me wondering, do the conversions normally need relays ? Having a look round seems to suggest not, and that most conversions are just a case of swapping a few wires.

Do you think it would be worth my while trying to remove the relays and getting the system back to the way it should be ? V8 or else ...

Post #461328 18th Dec 2017 8:27pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site