I’m about to replace my tyres however the spare does not have a TPS and the fault light is on although the check spare wheel message has now gone so it could be a faulty battery or sensor on the others.
Can you switch them off individually or can you only switch of the whole lot - I ask as I’m probably going to fit GG AT3 and may need to have the spare at a lower pressure to fit hence the question about switching them off individually as the spare would be always low pressure
Thanks

There is a setting in the CCF to turn off the spare wheel sensor, Well there is on mine so I guess yours will have it as well... you need an IID or other suitable diagnostics to change the CCF... Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Ok thanks for your help