Home > Maintenance & Mods (L405) > L405 Fixed Side Steps |
|
|
Red Merle Member Since: 19 Sep 2016 Location: Cornwall Posts: 2158 |
I've got the same issue at the moment; £662 for the "real thing" or as little at £175 ish for something with a near identical looking top, edge, under side and cast mounting brackets. The only thing that seem to be missing are the words "Range Rover" embossed in the top of the rubber and (oddly) fitting instructions, apparently!
|
||
3rd Sep 2017 6:04pm |
|
Basilfawlty Member Since: 18 Oct 2015 Location: Cheshire Posts: 655 |
The genuine articles are pretty good and solid and I'd guess they'd last well. I'm sure that there will be good aftermarket steps too that'd do a good job but before I spent my money on them I'd want recommendation from other users.
|
||
5th Sep 2017 7:37pm |
|
AndyS Member Since: 27 Feb 2016 Location: Lymington, Hampshire Posts: 404 |
I have a set of genuine one's for sale, maybe the odd mark or two on the rubber but otherwise in good condition.
|
||
6th Sep 2017 12:47pm |
|
rickz Member Since: 29 Aug 2017 Location: Kettering Posts: 10 |
Thats great, i'll drop you a pm now |
||
6th Sep 2017 5:01pm |
|
RRVSE Member Since: 18 Apr 2009 Location: Bury Posts: 597 |
I bought the factory fixed side steps, fair bit more than the aftermarket ones but LR Dealer gave me a discount which helped a bit. Fitted them myself, took me quite a few hours though, also had to thread the holes under the car (some are pre-threaded for the bolts and some aren't apparently depending when your RR was built or something !). Steve
|
||
19th Sep 2017 12:26am |
|
Red Merle Member Since: 19 Sep 2016 Location: Cornwall Posts: 2158 |
Have you had them for long? What has the quality of the OEM steps been like? |
||
19th Sep 2017 4:11am |
|
RRVSE Member Since: 18 Apr 2009 Location: Bury Posts: 597 |
I fitted mine over 2yrs ago and still look fine. There was an advisory notice for factory fitted steps around that time aswell and so on next service, the main dealer carried out the check even though they knew were not factory (mind you, it was ensuring the mounting bolts hadn't come lose I think , but I had used thread lock on them all anyway). They are substantial , the box they come in is a very heavy lift for 1 person and I just managed to fit them in my RR by putting a cloth on the centre armrest to allow the box rest on it and clear the tail gate. I'm glad I went OEM in the end even with the price difference. Steve
|
||
21st Sep 2017 4:31am |
|
Red Merle Member Since: 19 Sep 2016 Location: Cornwall Posts: 2158 |
Thanks, that’s good news
|
||
21st Sep 2017 5:41am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35331 |
i haven't looked but the fitting instructions should be available on topix.. ... - .- -.
|
||
21st Sep 2017 6:01am |
|
AMD Member Since: 16 Jul 2010 Location: The South Posts: 811 |
I have factory fit OEM and the quality is excellent. Why buy a £100k car and stick a non OEM accessory on it? It’s a Range Rover, not a Kia. Current MY2020
|
||
21st Sep 2017 7:09am |
|
Red Merle Member Since: 19 Sep 2016 Location: Cornwall Posts: 2158 |
Stan, if they don't come with the detailed instructions, I shall follow your advice.
|
||
21st Sep 2017 7:40am |
|
Fat Wolfie Member Since: 23 Jul 2017 Location: West Yorkshire Posts: 150 |
RM fully agree with the logic of buying the OEM. Have to say I'd have gone the next step too and had the dealer fit them too - maybe cost £100 to get them to do it (assuming you can't persuade them to do it free) and in the scheme of the purchase it's not a material sum. Maybe a tank of fuel
|
||
21st Sep 2017 8:34am |
|
Red Merle Member Since: 19 Sep 2016 Location: Cornwall Posts: 2158 |
Unfortunately, for the dealer, I bought the steps elsewhere, so that might be a bit of a cheek
|
||
21st Sep 2017 8:56am |
|
Fat Wolfie Member Since: 23 Jul 2017 Location: West Yorkshire Posts: 150 |
Yes, negotiating a free fitting could prove challenging under the circumstances |
||
21st Sep 2017 1:32pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis