Hi all,

Trying to find out if my rear caliper brake hose bolt is the banjo style with a copper washer either side etc. Struggling to find info or part numbers if anybody has please?

Have ordered a new caliper and just trying to source all parts in advance.
Thanks. 2005 (55) Range Rover 4.2 Supercharged Vogue SE Java Black

Yes they use a banjo bolt (where it connects to the rear brake caliper).

I bought both sides (they are handed), the numbers are :- LR058025 and LR058026.

They should fit your car but check first.

Thanks very much!
They look like the correct hoses. I was hoping to keep my existing ones is there a washer and bolt kit at all?
Or does anyone know the washer sizes I need? 2005 (55) Range Rover 4.2 Supercharged Vogue SE Java Black

Copper washer size on a 2006, ( most likely the same banjo bolts ) - ID = 10mm, OD = 16mm, thickness = from 1mm to 2mm, if using old washers or new 'old' stock always remember to anneal them first to get a good seal.

Thank you.
Will look for 10x16 washers 2005 (55) Range Rover 4.2 Supercharged Vogue SE Java Black

I bought mine from Duckworths (site sponsor) and they came with new bolts and copper washers

Have already bought my calipers unfortunately they are already on the way. 2005 (55) Range Rover 4.2 Supercharged Vogue SE Java Black

Noooo, the brake pipes came with the banjo bolts and washers fitted.

Also , before fitting the new flex's i got a small tin of Humbrol Black enamel paint and painted the short
metal section of brake pipe in the middle of the hose (this is prone to rusting).

Sorry my mistake haha.
Was hoping to use the original hoses being a tight a*se. 2005 (55) Range Rover 4.2 Supercharged Vogue SE Java Black