Removal of the complete egr system, cooler to exhaust manifold. It been discussed before and done by others but I have not seen a kit before. This one does not have the 15mm rubber water hose blanks but has all the other bits and is cheap as chips.

https://www.aliexpress.com/item/WLRING-STO...8.4.tGjeVS 2007 TDV8 VSE
2003 TD6 gone.
2002 P38a gone
1999 P38a gone
1997 p38a gone
1993 VSE gone
1992 VSE gone
1966 Series 2a with V8 conversion gone

Last edited by wayneg on 17th Sep 2016 6:09am. Edited 1 time in total

I did this and someone posted up a link to the blanking plugs for the cooling circuit.

i got a kit for an e39 530d IIRC and blanking plate for a Freelander 2.0td4

The cooler is a bit faff to get off mind but i found it easier than some might as i have no viscous fan  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.