fullfatrr.com - View topic - Bank 1 and Bank 2

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > Bank 1 and Bank 2

Page 1 of 1

Print this entire topic ·

STU TDV8

Member Since: 03 Apr 2016
Location: norfolk
Posts: 65

Bank 1 and Bank 2

Which set of cylinder's is classed as bank 1 and which set of cylinder's is classed as bank 2 ?...
Range rover TDV8 2007 ??..

18th May 2016 7:39pm

sako243

Member Since: 26 Dec 2013
Location: Wales
Posts: 608

2011 Range Rover Vogue TDV8 Santorini Black

I know the driver's side is labeled 1234 from front to rear. Right is 5678 front to back.

So one would assume bank 1 is left?! Ed

18th May 2016 9:17pm

STU TDV8

Member Since: 03 Apr 2016
Location: norfolk
Posts: 65

Yeah they were my thought's too..

18th May 2016 9:21pm

sako243

Member Since: 26 Dec 2013
Location: Wales
Posts: 608

Any particular reason? I've always heard them referred as LH and RH. Ed

18th May 2016 9:36pm

STU TDV8

Member Since: 03 Apr 2016
Location: norfolk
Posts: 65

Yeah my turbo actuator has gone and it give the bank number so need to know which side to look at ?.

18th May 2016 9:41pm

sako243

Member Since: 26 Dec 2013
Location: Wales
Posts: 608

I've found the workshop manual PDF (available via the Wiki) to be very useful. If you look in the relevant section there's normally a table of DTC codes with a diagnosis / debug procedure along side.

Perhaps if you look up those then it will tell you which side it's meant to be on. Ed

19th May 2016 9:20am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum