fullfatrr.com - View topic - I want to remove the factory running boards

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Mods (L322) > I want to remove the factory running boards

Page 1 of 1

Print this entire topic ·

Jeaningo

Member Since: 22 May 2022
Location: Bedford
Posts: 1

2007 Range Rover Vogue SE 5.0 V8 Monte Carlo Blue

I want to remove the factory running boards

Hello folks

I want to remove the running boards on my 2007 RR vogue
Do I need then the standard plastic sill covers because the front flaps need also be removed they're connected to the board I'm pretty sure that I have to buy a sill plastic cover kit did anyone know the part number for it or which parts I have to buy.

Many thanks for any suggestion
Jean

22nd May 2022 4:25pm

mjdronfield

Member Since: 04 Nov 2011
Location: Derbyshire
Posts: 7802

2011 Range Rover Vogue SE TDV8 Buckingham Blue

I don’t think you will have to buy anything, though there will be a drill hole in the front wing plastic panel where the mudflap is.

If it were me, I’d get new front mudflaps without the opening for the side steps, then you won’t have a hole showing.

2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

22nd May 2022 4:56pm

Phoenix

Member Since: 16 May 2022
Location: Gone
Posts: 1631

I've just de-sidestepped mine, other than a few corroded bolts that required an angry grinder to sort out, new non-sidestep front mudflaps were the only parts needed, the aftermarket ones from lrparts.net are pretty good IMO.

22nd May 2022 5:01pm

robanzac

Member Since: 07 Dec 2017
Location: New Zealand
Posts: 15

Yep as above - new front mudflaps will be required and once done you will never know it had sidesteps on it.
And to my eye they look a lot better and it is no more difficult to get in and out - might even be easier.

I removed my side steps a few years ago and the only real agony was sourcing the front mudflaps.
However mine was a 2003 and I think the early (i.e. BMW) L322's front mudflaps were different to the later models and consequently harder to find.
You will probably have an an easier time.

The removed sidesteps and matching mudflaps should be fairly saleable too. Rob

2nd Jun 2022 3:12am

JayGee

Member Since: 27 Jul 2021
Location: London
Posts: 3241

2012 Range Rover Vogue 4.4 V8 Orkney Grey

As above - easy job even if you have to break out the angle grinder. I left the sidestep mudguards on as they don’t bother me too much (Not as much as the side steps did) I’d like to remove the mud flaps as well to get a cleaner look but would be left with paint scars and holes. 2012 TDV8 Vogue (L322)

2nd Jun 2022 8:22am

Caesium

Member Since: 21 Sep 2021
Location: Essex
Posts: 451

2012 Range Rover Vogue SE 4.4 V8 Santorini Black

robanzac wrote:

The removed sidesteps and matching mudflaps should be fairly saleable too.

I doubt they will be in saleable condition. The side steps take a hammering from the wheels and mine were absolutely rotten, on a 2011 car. Christian.

Current Cars
2011 Range Rover Vogue SE
2020 BMW M4 Competition
2019 BMW X4

My RR Blog: www.facebook.com/L322Project
or
https://www.fullfatrr.com/forum/topic61540.html

3rd Jun 2022 12:57pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum