 | Home > Maintenance & Mods (L322) > Locking fuel cap |
 
|
|
|
| Turbo1541 Member Since: 12 Feb 2017 Location: blackburn Posts: 5   
|
I have a Lrrr vogue v8 td ,a fuel cap is not available for this model can anyone tell me if any other locking fuel cap off another make is compatible please ,many thanks Turbo1541 |
||
29th Jan 2018 3:53pm |
|
| stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35331
|
ask dan@duckworths in his section, he'll have one.. ... - .- -.
|
||
|
29th Jan 2018 4:12pm |
|
| nicedayforit Member Since: 11 Jun 2011 Location: Beside the Solway Posts: 3977  
|
Any use ?
|
||
|
29th Jan 2018 4:14pm |
|
| Turbo1541 Member Since: 12 Feb 2017 Location: blackburn Posts: 5
|
Thanks I will try both regards Turbo1541. |
||
|
29th Jan 2018 7:03pm |
|
| Sandyt Member Since: 07 Nov 2013 Location: Wraysbury Windsor Posts: 2265 
|
As Stan says Dan is the man
|
||
|
29th Jan 2018 7:08pm |
|
| Pawl Member Since: 07 Nov 2017 Location: West Midlands Posts: 693 
|
I've judt replaced ours with a BMW cap - which is the same fitting - based on older posts in the forum.
|
||
|
29th Jan 2018 7:17pm |
|
| Sandyt Member Since: 07 Nov 2013 Location: Wraysbury Windsor Posts: 2265
|
The caps were not lockable there is a plunger that locks the flap also think the cap has to have the nozzle to allow it to breathe not sure though - I left mine a few years ago at a petrol station and had to buy another think it was about 50 quid |
||
|
29th Jan 2018 8:05pm |
|
| Pawl Member Since: 07 Nov 2017 Location: West Midlands Posts: 693
|
Assuming it's the cap you want to replace, here's a link to 1 very similar to the 1 I bought- only £17 new, inc postage
|
||
|
29th Jan 2018 8:20pm |
|
| p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1534 
|
I didn't realise it had a restraining strap until I read this and then checked mine. It had come adrift from the cap and had been tucked away by the previous owner. I'll reconnect it with a self-tapping screw. I just assumed that the cap was placed in the holder in the fuel flap during refuelling (it's not as good at the holder on the P38A). Ron B. VK2OTC 2003 L322 V8 Auto 2007 Yamaha XJR1300 Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA |
||
|
31st Jan 2018 10:43am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
