Hi

I am about to change both cars the Transfer case Box oil

LR parts have the oil as: SHELL TF0753

What no body knows is what grade of oil is it - as LR fills up little plastic bottles and puts a sticker on it saying
"Special Transfer Box Oil"

which is as good as a bar of soap !

now as my good LR dealer has quoted me �120 + VAT for each car to have its transfer oil changed - you can imagine that its such a little job - labour 10 minutes at tops.

Click image to enlarge

You only need a litre of it, and a litre bottle from LR is about �13. I did mine a few months ago.

Hardly worth shopping around for that price. But yes it was Castrol and has the specification on the bottle.

The auto gearbox fluid however is a different matter - LR Want over �20 a litre (5HP24) for that stuff and you need 7 or 8 litres! You can find the same stuff half price in identical Mobil branded bottles!

Hey Zirconblue

Thanks for the update - noted

no problem, the picture above is just a generic one, the actual bottle was a castrol 1ltr one (all be it trade/industrial labelled rather than flashy retail labelling) in a land-rover box.

I don't remember changing the bungs on mine, i think it was just two alloy washers. (unlike the gearbox bungs which have bonded on seals)

Yep - Just buy it from dan, wasn't that much tbh when I changed mine a few years back.

According to Microcat the part is IYK500010 and is listed as Shell TF0753 rimmer bros have it too.

http://www.rimmerbros.co.uk/Item--i-IYK500010 There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Zirconblue

Workshop manual says if any help in future:

capacity - Wet and Dry fill 1.5 Liters (2.6 pints ) (1.5 US quarts )
Input shaft splines grease - Weicon TL7391

Transfer Case
Model: DD295
2 speed, permanent four wheel drive transfer box having synchronized shaft on the move facility with an actively controlled wet clutch and 50/50 torque split across the centre differential.
Clutch Type: Wet, multi plate
Max Torque capacity: 2500Mn
Ratios: 1:1 ( low 2.93:1)
High to low ratio = 40kph ( 24.8 mph )
Low to high ratio = 60kph (37.2 mph)

Transfer case fluid Drain Plug M16 = 22NM
Transfer case fluid Filler Plug M16 = 22NM
Transfer case fluid Drain Plug M18 = 28NM
Transfer case fluid Filler Plug M16 = 28NM
Transfer case shift motor bolts = 45NM
Transfer case clutch control solenoid bolts = 5NM

Workshop manual also states:

Refill transfer case with recommended fluid, until the fluid is level with bottom of filler/level plug hole.
INSTALL A NEW SEALING WASHER
Install the fluid/level plug and tighten to ( see torque settings above )

Purchased my transfer box oil today from advanced. Just wondering if anyone knows the amount needed, the bottle I got contains 946ml which I'm told is enough. I don't want to end up being short.

From memory it require around 1.3 litres I think

John is kinda right

Thanks Stan. I will let you know how I get on.

ryan did his 4.2 and 1.3 litres came out,

http://www.fullfatrr.com/forum/post313441.html#313441 ... - .- -.




Y. O. L. O.
.

You will need more than 1 litre I'm afraid.  Visiting from DISCO3.CO.UK
Discovery 3 TDV6 Auto HSE Zambezi Silver

Thanks guys. I've just ordered another 1L tub.

Earlier ones are only 1ltr fill from dry or 0.96ltr refill.

They presumably changed the transfer box with the 6 speed gear boxes.

If you look at our website we list oil grades and quantities in the service item section for each model.

I have given up telling people to use 75w90 for transfer boxes and simply list it as the Shell TF0753. I did this research a long time ago and found it to be basically 75w90. However I got a little annoyed with so many opinions from forum experts telling me I was wrong. (Not this forum I might add)

Needless to say my Magna Steyr runs on 75w90.

LR have a habit of hiding true grades and even on Microcat they refer you to the Castrol website for data, once on the Castrol site they refer you to the dealer for the correct oil. Nothing like running a closed shop on data is there! Paul Redding
+44 (0)23 8052 2760
paul@advancedfactors.co.uk