Uneven tyre wear - can a wheel bearing cause it? | |
Hi all,
As you can see, the rear tyre is wearing very unevenly on my RR - the outer shoulder is almost bald, whilst the inner shoulder (and the rest of the tyre) is almost full depth:
![](https://s3-eu-west-2.amazonaws.com/i.hubnuts.uk/xpb/8f/8f24df67a64ac9ea20f9fcebbdeffc855ce2d1d7c214ca247202dad9470c819d.jpg) | Click image to enlarge |
![](https://s3-eu-west-2.amazonaws.com/i.hubnuts.uk/xpb/57/5757d4a7b0d355296e343713bb0ed7b7dc88c525b08545cc8a676c65d0d147a9.jpg) | Click image to enlarge |
Now, obviously the first thought would be to get the tracking checked - and I'm already looking to do so. But I have noticed recently a bit of a grumble at motorway speeds or when cornering, which I think is a rear wheel bearing on its way out. Would a slightly grumbly but not catastrophically knackered bearing be able to cause this sort of damage to the tyre by letting the wheel assume an extra degree of toe?
Thanks,
Matt
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated NW060
"Red Shed" - 1982 Series 3 88" County Station Wagon
"Spirit of Great Britain" - Rolls Royce Meteor V12 engine
ZG875 - Westland Sea King (cockpit section)
"Carly Rae Jeepsen" - 2006 Jeep Commander 5.7 Hemi
"Pride Of The Road" - 1/4-scale Marshall traction engine - sold
"Georgina" - 2000 Discovery 2 TD5 ES - sold
"Windsor" - 2005 Range Rover Vogue 4.4 - dead
|