![]() | Home > Maintenance & Mods (L322) > l322 inner door handle surrounds |
![]() ![]() |
|
|
bruno22rf Member Since: 08 Mar 2018 Location: milton keynes Posts: 69 ![]() ![]() ![]() |
Anyone ever painted theirs? Mine are looking tired after 14 years and paint is beginning to part company with the plastic. Thinking about using paint stripper to remove the old coating then buffing up the black plastic underneath or simply re -spraying them the greyish colour. Any hints or tips much appreciated - don't want to go down the stick on covers route as the handles I did looked naff. |
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8518 ![]() ![]() ![]() |
You will have to remove every last trace of the silver, it will not let anything stick to it, not even wrapping works unless all the silver has gone, paint will just fall off. If you use paint stripper you will damage the plastic, you have to sand off all the finish, the plastic then becomes hairy so you have to use finer and finer grit paper until it is smooth and flat...
|
||
![]() |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1557 ![]() ![]() |
There's a thread on this somewhere here. I have yet to do mine. Ron B. VK2OTC
|
||
![]() |
|
p38arover Member Since: 16 Dec 2015 Location: Western Sydney Posts: 1557 ![]() ![]() |
There is some useful info here:
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
