Hi all,
blower motor has a bit of a squeal this morning.
I there an easy way to get to the blower motor shaft to spray lubricant without removing half the dash?
can you get to the motor shafts by removing the cabin filter panel at the bulkhead?

bit cold outside so looking for a quick way

many thank
Ricky

If you strip off the cabin filter housing at the bulkhead you can see a good bit of the blower fan assembly.
I don't doubt you could spray in sufficient oil to stop the thing squealing.
It's what I would try first if I had the problem.

thanks, will give that a try,
when its warmer!