I bought from member daveo a interface. Now he is on holidays and I don't know how to use it. One side there are black, red an yellow wires . On the other side I believe is the interface. Where do I put now what? Photos are welcome. Hasn't got a USB on it. So how do I put it on my laptop. Hope anybody can help otherwise I have to wait for him to get back  Daniel

Past:FFRR 2004 Vogue 4.4l bonnatigrey/sand/ burr walnut
Modifications: SC grill (not fixed) SC MY10 sidevents (not fixed), MY10 Letters front and back, clear sidelights , MY10 rear lights (not fixed), MY09 steering wheel trims, new MY09 sterringwheel 19'' seven spoke wheel (not fixed) 19'' MTS (not fixed), 20 '' wheels, doorhandelcovers brunel (not fixed), complete doorhandels (not fixed) burr walnutdoorsouround (not fixed)

Last edited by Mounty on 23rd Aug 2010 10:48am. Edited 1 time in total

Check the Navcoder install file. There is a wiring diagram for a vvery simple interface.

Or have a look here: http://www.reslers.de/IBUS/index.html

Don't know what he sent you, but the R,B, and Y wire should be +, -, and IBus respectively. And if it's not USB, it'll be RS232 (serial). You'll need a USB/serial adapter. 
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

Sorry that is all cryptic to me. Try to put a photo in the thread. As far as I understud. I have to put a USB Adapter on to the wires? I also don't no where to connect it in the car. Daniel

Past:FFRR 2004 Vogue 4.4l bonnatigrey/sand/ burr walnut
Modifications: SC grill (not fixed) SC MY10 sidevents (not fixed), MY10 Letters front and back, clear sidelights , MY10 rear lights (not fixed), MY09 steering wheel trims, new MY09 sterringwheel 19'' seven spoke wheel (not fixed) 19'' MTS (not fixed), 20 '' wheels, doorhandelcovers brunel (not fixed), complete doorhandels (not fixed) burr walnutdoorsouround (not fixed)

Can you post a picture of the thing you have? It sounds different to mine... 

Will do tonight. Maybe daveo did his own thing. Daniel

Past:FFRR 2004 Vogue 4.4l bonnatigrey/sand/ burr walnut
Modifications: SC grill (not fixed) SC MY10 sidevents (not fixed), MY10 Letters front and back, clear sidelights , MY10 rear lights (not fixed), MY09 steering wheel trims, new MY09 sterringwheel 19'' seven spoke wheel (not fixed) 19'' MTS (not fixed), 20 '' wheels, doorhandelcovers brunel (not fixed), complete doorhandels (not fixed) burr walnutdoorsouround (not fixed)

I thought he had this one (v6):



Where as I have this one (v5):

 

Well mine looks different. What is on the lower picture is in blacktape and longer and smaller and you only see connection in the shape like a firewire but the shape is rectangular and a small open square on the top. Daniel

Past:FFRR 2004 Vogue 4.4l bonnatigrey/sand/ burr walnut
Modifications: SC grill (not fixed) SC MY10 sidevents (not fixed), MY10 Letters front and back, clear sidelights , MY10 rear lights (not fixed), MY09 steering wheel trims, new MY09 sterringwheel 19'' seven spoke wheel (not fixed) 19'' MTS (not fixed), 20 '' wheels, doorhandelcovers brunel (not fixed), complete doorhandels (not fixed) burr walnutdoorsouround (not fixed)

That’s a USB socket… You need the same lead that goes into your printer (A-B) one is a flat end one is a square end.

Dan 

Ok. What do I do with the wires? Daniel

Past:FFRR 2004 Vogue 4.4l bonnatigrey/sand/ burr walnut
Modifications: SC grill (not fixed) SC MY10 sidevents (not fixed), MY10 Letters front and back, clear sidelights , MY10 rear lights (not fixed), MY09 steering wheel trims, new MY09 sterringwheel 19'' seven spoke wheel (not fixed) 19'' MTS (not fixed), 20 '' wheels, doorhandelcovers brunel (not fixed), complete doorhandels (not fixed) burr walnutdoorsouround (not fixed)

*Sigh*

http://www.fullfatrr.com/forum/topic1797.html?highlight=resler 

Ah, micro usb. Same a lot of camera's use.

Dan 

Is there adapter for that?

I read the other thread. Do I have to put on the wires which things so I can conect it via the navigation in the back. Daniel

Past:FFRR 2004 Vogue 4.4l bonnatigrey/sand/ burr walnut
Modifications: SC grill (not fixed) SC MY10 sidevents (not fixed), MY10 Letters front and back, clear sidelights , MY10 rear lights (not fixed), MY09 steering wheel trims, new MY09 sterringwheel 19'' seven spoke wheel (not fixed) 19'' MTS (not fixed), 20 '' wheels, doorhandelcovers brunel (not fixed), complete doorhandels (not fixed) burr walnutdoorsouround (not fixed)

MMMmmm - I think before we get to how the I-Bus interface works, we're going to need to discuss searching on your own.
5 items to the right of the RF wheel of the silver RR at the top of the screen (which is identical to mine, BTW ) is 'search'. Click that, type 'navcoder' and it will take you to a page with several results - not too many - where, amongst others, Dan's thread will show up: http://www.fullfatrr.com/forum/topic1797.html?highlight=navcoder.
The Resler page which I linked to yesterday also contains the info you need.

Then do the big search for 'micro USB' now that Dan has helped you that far.

If all that doesn't work you'll need to buy me a large number of beers and I'll come to Basel and hook it up for you.  
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

Yes Sir


Micro USB: Found out I need to buy some cable, so I can connect it to my laptop. Wires look like that I have to buy beers or some decent Creman't d'alsace. Read something obout blowing fuses and about -12 and plus 12. it In those things I'm just useless. I got the rearlights  Daniel

Past:FFRR 2004 Vogue 4.4l bonnatigrey/sand/ burr walnut
Modifications: SC grill (not fixed) SC MY10 sidevents (not fixed), MY10 Letters front and back, clear sidelights , MY10 rear lights (not fixed), MY09 steering wheel trims, new MY09 sterringwheel 19'' seven spoke wheel (not fixed) 19'' MTS (not fixed), 20 '' wheels, doorhandelcovers brunel (not fixed), complete doorhandels (not fixed) burr walnutdoorsouround (not fixed)