I think I have jet washed a problem to my attention here !!

I washed the car this morning. Just driven her and when I put into reverse I get no sensors and a flashing light

1. checked the "ticking" - present on all but front near side sensor
2. Long beep is present when engage reverse
3. flashing light is present when engage reverse

Any cure, cheat, trick etc or should I start looking for new ones..
Thanks Is this where I put the car details and a bit about myself ?........

let it dry out Nick, hopefully it will be ok tomorrow.. ... - .- -.




Y. O. L. O.
.

Ye hope so Stan.

Going in for gearbox/transfer/diff oil and needs new ARB's (poss drop links) so could do without more to the list ! Is this where I put the car details and a bit about myself ?........

curious to know what the reason for the replacement ARB's is.. ... - .- -.




Y. O. L. O.
.

Bushes !!!

 Is this where I put the car details and a bit about myself ?........

Will remove the front nearside sensor tomorrow and see if I can see a break in the wire, test it against another. If not I'll need to get one ordered, painted...etc etc  Is this where I put the car details and a bit about myself ?........

Anyone know how to remove the near side front sensor....

I cant get my hand around the back of the washer vessel  Is this where I put the car details and a bit about myself ?........

Replaced the non-ticking sensor....new one doesn't tick either so I can now assume a fault on the loom maybe ?

Any mileage in a new loom for the front...am guessing its a bumper off ? Is this where I put the car details and a bit about myself ?........