Hi all, have bought a refurb kit for my peeling 2010 smart key from Dan, would anyone be able to provide directions/instructions on how to replace the old damaged covers with the new ones supplied in the kit? Should've been old enough to know better...doh!
Current 2010 5.0 SC Autobiography
Previous 2006 TD6 Vogue SE
Previous 1998 P38 4.6 Vogue Autobiography 50 (No 10)

10th post down on this thread , not sure if the member is still here but suppose you could PM him in the off chance until somebody comes along to tell you

http://www.fullfatrr.com/forum/post209566.html ====================================

"Open Mike Night " sounded like a lot of fun until i found out i was going to an Autopsy

Thank you for the link Joker, much appreciated.

I have managed to figure the process out and it took about 15-20mins to swap the electronics, and metal parts over. The hardest piece was the emergency key release mechanism and that was because I was to tentative with it!

Anyway job done and a presentable key is the result  Should've been old enough to know better...doh!
Current 2010 5.0 SC Autobiography
Previous 2006 TD6 Vogue SE
Previous 1998 P38 4.6 Vogue Autobiography 50 (No 10)

What glue did you use to put the covers on?

No glue needed with the refurb kit, it just snaps together. Should've been old enough to know better...doh!
Current 2010 5.0 SC Autobiography
Previous 2006 TD6 Vogue SE
Previous 1998 P38 4.6 Vogue Autobiography 50 (No 10)

^ did this with my disco keys, much improved result, and fairly
Straight forward after the first.... There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6