Front.



Rear.



Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Under the bottom ball joint on the front suspension arm, if you really can't find anywhere better.

Or get a large bottle jack and use the proper jacking points, which would be better and safer Adam, not good if the suspension decides to level itself out whilst you have a jack under it, so make sure you leave a door open. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Unnecessary quote removed

Excellent thanks

Bottle Jack Modification to replace Scissor Jack

Don't be tempted by the 4 tonne halfords jack, doesn't lift high enough.

Merc sprinter jack supposed to be best way forward, not used one however as I use a high lift 4x4 trolley from machine mart cos I don't have steps, it will fit under, fit under the tubes as well. it has an adjustable head on it so it gives a bit more lift and can be wound up almost to touch the jacking point before you start pumping.

This one.

https://www.machinemart.co.uk/shop/product...ley%20jack There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Yeah got a trolley jack but thinking the bottle jack will be more suitable to always have in the vehicle....... They're £39.99 now though , typical