hi, has anybody used the britpart filter on a td6 with gm box,i am going to change the oil and filter and was wondering the best filter to use

Best filter is a genuine Land Rover filter from Dan at Duckworths...

i have sent a email to duckworths but had no reply yet.

Not sure on the td6 box but the genunie part on the 6hp26 on the tdv8 is a filtrans unit. Gen wasnt expensive from dan. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

oe filter for the gm box is filtran, last time i priced one from lee at duckworths in kirton was over £100. heres a link to some one selling the original filter and gasket for half the cost.
http://www.ebay.co.uk/itm/261372667442?ssP...1423.l2649

just checked rimmers for a rough cost to see if they have come down since i last priced them and it would seem they have, 75 including the vat retail now.

thanks for your help i will buy the filter on ebay,noticed they do the oil as well in a kit ,is it dextron 111,is this the right oil

after i had my gearbox rebuilt the guy who did it condemned the type of oil gm specified and said its only a standard dexron 3 and should really be a full synthetic instead, since the rebuild i run mine on the oil he recommended and to date is nice and smooth. although it should be as it only been on just over a year, only time will tell. if i where you i would be inclined to get some full synthetic dexron oil and flush it a few times then keep it on the good stuff, synthetic oil in my opinion can only help the gearbox and hopefully keep it trouble free.

Shouldn't oil be Dextron VI (6)

i thought dextron V1 was for the 6 speed box,millers recommend millermatic atf sp lll ws code 6213, this oil is getting to be a minefield.

This is the correct oil. Texaco ETL-7045E. But from a list that was about some time ago Dextron VI can be used if licenced by GM. Dextron VI superceeds all previous Dextron's ( III, IV etc )

changed the oil and filter today,thanks arron for the filter link ,i used millers oil ,i rang there technical department and they had a choice of 2 ,the job was really easy took about 2 hrs .