Home > Technical (L322) > TD6 Air filter and breather |
|
|
Advanced Factors Site Sponsor Member Since: 31 May 2013 Location: Southampton Posts: 196 |
http://www.advancedfactors.co.uk/llj500010...1747-p.asp
|
||
11th Oct 2013 3:57pm |
|
B9er Member Since: 10 Dec 2012 Location: Larne Posts: 191 |
When you get the air filter housing removed, the crank case breather filter is located at the back of the rocker cover on the drivers side of the engine (assuming right hand drive car). I found it made the job easier if you unbolt the injector wiring harness and unplug it from the rear most 4 injectors. This gives clearance and visibility to get at the Allen headed bolts holding the filter housing on. It's pretty easy to change, putting the air filter housing back on however, is a bit fiddly in my experience. Patience and getting the back two bolts started first is the key to success Should've been old enough to know better...doh!
|
||
11th Oct 2013 5:12pm |
|
33CHINACARS Member Since: 14 Apr 2011 Location: Tyrendarra, Victoria, Australia Posts: 381 |
Replace Crank breather with part # 11127799367 ( oil separator). Wont need changing again
|
||
26th Oct 2013 4:17pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis