Home > Maintenance & Mods (L322) > how to save 3 settings on iid tool |
|
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16284 |
Save and restore is near the end of the Mwnu |
||
7th Sep 2013 8:17am |
|
Tallsaj Member Since: 23 Aug 2013 Location: Birmingham Posts: 75 |
Thanks Craig. I hear u been driving low for a while makes the Range look awesome and probs to the suspension long term?
|
||
7th Sep 2013 8:44am |
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16284 |
Mine is very slightly lowered... Not very low at all...
|
||
7th Sep 2013 8:49am |
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16284 |
Overfinch are the bumpers of choice for your SC but are very very expensive Usually £1000 plus each for used ones |
||
7th Sep 2013 8:51am |
|
Tallsaj Member Since: 23 Aug 2013 Location: Birmingham Posts: 75 |
I got mine on access level going to drive around today see if I can live with it. Any suggestions on how I can tidy up the back around the exhaust pipes and towing attachments? |
||
7th Sep 2013 8:57am |
|
ebajema Member Since: 24 Mar 2011 Location: New Plymouth Posts: 4782 |
A cheap and simple way to tidy the back is to clean the exhaust etc. and paint it matt black with heat resistant BBQ paint or the likes. Quite a few forum members have done that and it makes quite a difference. Wire brush clean the rear, wash it down well with thinner/white spirit and then paint it black MY 2010 5.0 SC Galway green and sand interior!!
|
||
7th Sep 2013 9:04am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis