Home > General (L405) > Clarkson's abrupt change of tune... |
|
|
campaj1 Member Since: 22 Oct 2012 Location: Cheshire Posts: 729 |
Whilst his sunday times review of the L405 was predominantly positive, in a recent column in the subscribers edition of Topgear magazine clarkson appears to attack the styling and image of the L405. This seems odd, no? Anyone else seen these articles?
|
||
29th Jan 2013 2:01pm |
|
mzplcg Member Since: 26 May 2010 Location: Warwickshire. England. The Commonwealth. Posts: 4029 |
Reads OK to me in all honesty. Clarkson is a die-hard Range Rover fan and a lot of his comments of late seem to have been based on a fear that Land Rover would screw up the RR by basing it all on Footballers tasteless Cheshire bling. He acknowledges in this article that they have not done this.
|
||
29th Jan 2013 2:18pm |
|
Philip Member Since: 05 Jan 2010 Location: UK Posts: 2564 |
The link is the Times article, not the Top Gear column. He's in the business of entertainment, not journalism. |
||
29th Jan 2013 2:29pm |
|
Philip Member Since: 05 Jan 2010 Location: UK Posts: 2564 |
So basically repeating what has already been said here and elsewhere ... |
||
29th Jan 2013 3:00pm |
|
campaj1 Member Since: 22 Oct 2012 Location: Cheshire Posts: 729 |
yeah hes just jumping from bandwagon to bandwagon
|
||
29th Jan 2013 3:02pm |
|
Gazellio @ Prestige Cars Member Since: 22 Jan 2010 Location: Chilterns, UK Posts: 11309 |
That may be the case but I have read many of books compilations of his Times articles and laughed my socks off! |
||
29th Jan 2013 3:10pm |
|
campaj1 Member Since: 22 Oct 2012 Location: Cheshire Posts: 729 |
its just a bit of fun... happens to be about cars though!
|
||
29th Jan 2013 3:18pm |
|
DMRR Member Since: 14 Apr 2010 Location: Northamptonshire Posts: 2027 |
The 'fins' have always been decorative ..... Land Rover Addict
|
||
29th Jan 2013 4:02pm |
|
Philip Member Since: 05 Jan 2010 Location: UK Posts: 2564 |
Hot air certainly comes out of them, and the factory vents have mesh in the valleys of the louvres (although I know the holes aren't open directly into the engine bay). |
||
29th Jan 2013 4:16pm |
|
campaj1 Member Since: 22 Oct 2012 Location: Cheshire Posts: 729 |
i heard that the air intake was in them for L322? might be wrong...
|
||
29th Jan 2013 5:25pm |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8504 |
fins on the 405 are on the doors so are purely decorative... There is nothing that can't be fixed with a hammer😜😜
|
||
29th Jan 2013 8:20pm |
|
DMRR Member Since: 14 Apr 2010 Location: Northamptonshire Posts: 2027 |
Well on all the ones I've owned the air intakes are forward of the engine, certainly not on the side where there is *zero* chance of getting a decent intake with it whizzing past at 70mph
|
||
29th Jan 2013 9:23pm |
|
campaj1 Member Since: 22 Oct 2012 Location: Cheshire Posts: 729 |
the man speaks the truth
|
||
29th Jan 2013 9:25pm |
|
Philip Member Since: 05 Jan 2010 Location: UK Posts: 2564 |
Why go to the effort of engineering front wing pressings with big square vent holes, and vents which actually are vents, when you could simply stick a bit of solid plastic over the panel as per the L405? I think your "heat rises and they aren't at the top" analysis may need more thought ... |
||
29th Jan 2013 9:42pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis