I need to replace an inner front parking sensor. I assume the front bumper needs to come of

Anyone done this? Any tips to make the job easier?

Thanks

This is from RAVE. May be worth downloading from the Wiki if you don't have it.

Click image to enlarge

Click image to enlarge

Click image to enlarge

I had to do this job. It's not hard at all. The most complex bit was unplugging the hose from the washer bottle and draining it out. It's simple as.

Obviously make sure you have something non scratching to put the bumper on when it is removed.

A little tip, use a cardboard box in front of the bumper to take the strain whilst you unhook all the electrics and the washer hose. Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

Thanks to both

When it's off it should look like this:

Click image to enlarge

Get a second pair of hands to help, that way when you unplug/plug the sensors, fogs etc the other person can hold the OS corner against the body whilst you do the NS and visa versa before it all falls on the ground ripping wiring out of plugs!

Another quick tip is to remove the fog light bulb rather than trying to unplug the fog light wiring...Much easier...


Craig