Home > Maintenance & Mods (L322) > Dead VentureCam fixed |
|
|
CBH25 Member Since: 18 Feb 2012 Location: Sunshine Coast, Australia Posts: 82 |
Just posted this on Aus L322 site, and thought it might be relevant here.
|
||
7th May 2012 12:36pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35406 |
good to know, thanks... ... - .- -.
|
||
7th May 2012 4:37pm |
|
CBH25 Member Since: 18 Feb 2012 Location: Sunshine Coast, Australia Posts: 82 |
Yeah theres a melted rubber seal around the perimetre which you have to slice/crack, and I butchered mine up a bit.
|
||
8th May 2012 1:15am |
|
stu Member Since: 04 May 2011 Location: Richmond North Yorkshire Posts: 927 |
thanks for that, have done it!! all opened up and have opened the battery pack up too. i will get batteries when i get a chance and see how it goes.
|
||
8th May 2012 4:42am |
|
daveo Member Since: 21 Oct 2009 Location: london Posts: 2307 |
there is a post about this somewhere, it started with the same problem,cam not charging. i came across this quite awhile ago when a friend bought a 2006 and the cam was dead, i managed to jump start the battery with out opening it, some times the battery's get so low that one of them can change its polarity. i repaired his this way and they it went on working even after he sold the car, the same with my two and i have not had any probs, i all so repaired a pair for a member on this forum, V8 facelift Range Rover Autobiography 22" wheels.
|
||
8th May 2012 6:44am |
|
Contraband Member Since: 08 Nov 2010 Location: FIFE Posts: 3697 |
And it's still working dave... Previously..
|
||
8th May 2012 7:14am |
|
stu Member Since: 04 May 2011 Location: Richmond North Yorkshire Posts: 927 |
well i've just had a go at repairing a dead cam. i opened it up and removed the battery pack. went to tesco and bought some AAA rechargable batteries. the cam uses six of said batteries, they are maybe not quite the same but you got to try these things.
|
||
13th May 2012 12:47pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis