just noticed my rear high brake light doesn't seem to be completely flat it seems a little up and one and like it its not being held down properly?

Is it held in by clips ? Just wondered as i didn't want to start messing with it until knew what to assemble it in the first place.

Thanks

mine was slightly raised to the lefthand side. Looked at it and the top had 'come unstuck' / warpped from the back plate. Due to water egress i decided to change it!.

That's funny I noticed mine was the same just last week. 2008 MY Supercharged
Rimini Red / Jet
four zone climate
remote park heater
and no ugly kid windows.
magnus satis quod turpis satis

This is exactly what I have a slightly raised left hand side...so is it warped? How much is a new one?

the part was approx £55, easyish to change. Remove 3 bolts from upper spoiler. Remove inner upper trim. Undo a few screws of light and unplug electrics. Slide light unit out. Only thing to note was the lagre rubber grommet needs to be moved to the far r/h side.