hi all,
can any one tell me how to remove the handles on my rr vogue
as they are a bit scruffy and in need of a paint
thanks

Don't exactly know , but have heard they can be a bit of a PITA to take off ..

You could fit some covers instead. Check out ebay or Powerful UK. I understand they fit well. Current MY2020
Gone: 1 x L405 and 2 x L322's

thanks any way mike
if they are a pain in the a$$ to take off i might just buy some covers

^^^^^^^ What AMD said , i have had the covers on my handles for nearly two year now , 5 minute job done ….

This is what they look like on

Click image to enlarge

did u have to get them sprayed ?

No just bought the Black ones coz i changed all the bog standard brunel grey bits to black

ok thanks for the info

Has any one tried to take these off before ?

Hi, you need to remove the door card then undo the 10mm bolt 25mm back from the front of the inner black plastic handle holder, then remove a small black rubber grommet inside the door shut (behind the lock in drivers door and lock blank in other three) undo the torx head bolt and the lock cover will fall off in your hand. Undo the cable either at the handle end of the mechanism end and wiggle the handle... It should then come out... Hope this all helps, not too hard to do... Incidentally, the material land rover make the handles from is and even if you paint them you will find they may chip again! So if you do a web search for powerfull uk ltd, they do the handle covers in any painted colour and also chrome etc etc. I painted my first 2004 vogue set java black and soon realised the plastic material was to blame for the handles marking/chipping not the paint and fitted a set of their door handle covers which were on there for over four years before sale without one mark appearing!

I think the covers work really well and are a perfect fit.

They are cheaper and in stock at http://www.lrparts.net/

Thanks for all your help but I think I will go for the covers