Hi,

Apologies asked before but information I got related to manual handbrake console

Stuck with this !

Need to change my EPB switch but can’t see how you remove the centre console which I assume has to be done to access the four screws

I could have ago at attacking it but prefer to do it without damage

Found all the info on removing the earlier type without EPB but can find nothing for the later facelift with EPB switch in workshop manual

Any one got any instruction / video

Thanks If its not broke now it soon will !!!

Is it definitely your switch that's at fault? They rarely fail.

Instructions are in the 3rd post on this thread:

https://www.fullfatrr.com/forum/post195539.html

I removed mine to replace the handbrake switch but it turned out to be a corroded wire in the rear left wheel arch.

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

Hi David,

Thanks for info, but question asked relates to Freelander, looks like this went on 322 by accident

Have listed on correct site now

Regards If its not broke now it soon will !!!