Any GAP tool aficionados on here that can help with some settings the GAP tool can change such as remembering the last auto start/stop setting and the drivers assist settings?

Also is there a way to disable the seatbelt chime on an L460? "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

I'd also be interested to know this.

There was a guy in birmingham that said he could turn off auto stop/start and the seatbelt chime but haven't been able to organise a trip yet and don't know how he would do it.

The annoying "door open" when engine on chime would also be a great thing to disable

does the L460 have all its bits in the rear right cubby like the L405?

if so , the setup might be the same and you can disconnect the signal wire to the capacitor or disconnect the aux battery if you have one.. ... - .- -.




Y. O. L. O.
.