Hi, I have recently got a new set of after market deployable steps for a 2010 on L322. They are discontinued now and have been sat in someone's shed for a few years.

From a bit of research they appear to be riviera styling/victorious automotive (chineese) but with stainless axles and brass bushing look ok to be fair. They come with a loom and control ecu all specific to the face lift 2010-2012 cars.

The only problem is the instructions are missing! The nuts and bolts are self explanatory but the wiring no so much.

The loom has 4 branches, LH motor, RH motor, main power/earth and CAN H/CAM L. I am struggling to know where to connect the can wires. They are pre terminated as thought they are ment to be added to an existing plug within the car loom.

I've looked at gen LR fitting manual for deployables and it looks to be a very more involved loom with only one pin in plug connection. Any help on this would be great, thank you

As per this pic

try a forum search theres loads of threads that might help you. ... - .- -.




Y. O. L. O.
.

Hey bena, is that the actual picture of your steps? Judging by the picture you posted those steps are for the L405 or possibly the sport. The brackets don't look anywhere near like the L322 steps.

And on closer inspection, the brackets seem awfully thin in comparison to originals.