Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > Warning Triangle installation: Wiring in the way
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
lschwarcz



Member Since: 18 May 2019
Location: Hillsboro, OR, USA
Posts: 273

United States 2009 Range Rover Autobiography 4.2 SC V8 Bournville
Warning Triangle installation: Wiring in the way

Hi Everyone,

I bought the LR Warning Triangle to install in my '09 L322. It should be a super simple installation but for one issue. There's some wiring that's in the way.

If you look in these pictures, I've put a red square around the bits that are in the way.

Before I start snipping zip ties and trying to reroute some of these wires, has anyone else run into this issue? If so, how did you reposition these bundles of wires?

Click image to enlarge




Thanks in advance!
Larry. 2009 Range Rover L322 Autobiography
Bournville/Ivory
Save lives, give blood.

Post #574215 26th Nov 2020 6:42pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35262

United Kingdom 

put the triangle in the wheel well.... ... - .- -.




Y. O. L. O.
.

Post #574216 26th Nov 2020 6:44pm
View user's profile Send private message View poster's gallery Reply with quote
lschwarcz



Member Since: 18 May 2019
Location: Hillsboro, OR, USA
Posts: 273

United States 2009 Range Rover Autobiography 4.2 SC V8 Bournville

Yea, it'll fit there but it's supposed to go in this side pocket. And my OCD* demands that's where I put it! Smile

I think I can gently reposition those wire bundles a bit and then secure them again with some fresh zip ties. I'm pretty busy today (Thanksgiving holiday here in the USA) but I'll try to tackle this one over the weekend.

Thanks!
Larry.

* My OCD is actually pretty mild. I have a friend who has, "CDO." It's exactly the same as OCD but in the correct alphabetical order. Rolling with laughter 2009 Range Rover L322 Autobiography
Bournville/Ivory
Save lives, give blood.

Post #574217 26th Nov 2020 6:51pm
View user's profile Send private message View poster's gallery Reply with quote
northernmonkeyjones



Member Since: 24 Mar 2012
Location: derby
Posts: 8500

United Kingdom 2016 Range Rover Autobiography SDV8 Santorini Black

Mine went in there no problem....

Put it in the hole at the bottom and shut the flap... There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Post #574220 26th Nov 2020 6:57pm
View user's profile Send private message View poster's gallery Reply with quote
lschwarcz



Member Since: 18 May 2019
Location: Hillsboro, OR, USA
Posts: 273

United States 2009 Range Rover Autobiography 4.2 SC V8 Bournville

When I try that the triangle is pressing against those wire bundles with a bit of pressure. These cars are famous enough for their electrical issues. Shocked

I'd rather see if I can get it to fit there without pressing on the wiring.

Thanks!
Larry. 2009 Range Rover L322 Autobiography
Bournville/Ivory
Save lives, give blood.

Post #574221 26th Nov 2020 7:03pm
View user's profile Send private message View poster's gallery Reply with quote
vs322



Member Since: 08 Apr 2020
Location: Athens
Posts: 584

Greece 2004 Range Rover HSE 4.4 V8 Java Black

I hear you about the OCD...

Hope these will help.

The triangle fits at the recessed base while it's mounting/ holder is secured with a plastic pin in the hole at the top. (See arrows) I believe the wires won't be in the way like this.


Click image to enlarge

Post #574267 27th Nov 2020 9:33am
View user's profile Send private message View poster's gallery Reply with quote
lschwarcz



Member Since: 18 May 2019
Location: Hillsboro, OR, USA
Posts: 273

United States 2009 Range Rover Autobiography 4.2 SC V8 Bournville

You would think so, but that's not the case. With the top holder in the correct location those wires do interfere with the triangle.

I'll try carefully repositioning the wire bundles (no tugging, pulling or additional tension on them!) to see if I can get it to fit.

Thanks!
Larry. 2009 Range Rover L322 Autobiography
Bournville/Ivory
Save lives, give blood.

Post #574321 27th Nov 2020 4:20pm
View user's profile Send private message View poster's gallery Reply with quote
vs322



Member Since: 08 Apr 2020
Location: Athens
Posts: 584

Greece 2004 Range Rover HSE 4.4 V8 Java Black

Best of luck!

Post #574330 27th Nov 2020 5:02pm
View user's profile Send private message View poster's gallery Reply with quote
flashheart59



Member Since: 27 Jul 2013
Location: Essex
Posts: 22

United Kingdom 2010 Range Rover Autobiography 5.0 SC V8 Galway Green

Trying to fit a genuine triangle myself and having the exact same problem - was rerouting the cabling the answer/possible? Thanks in advance.

Post #684671 3rd Feb 2024 12:37pm
View user's profile Send private message View poster's gallery Reply with quote
RichTD6



Member Since: 02 Mar 2011
Location: Lincolnshire
Posts: 84

United Kingdom 2012 Range Rover Westminster TDV8 Zermatt Silver

My previous car, a 2005 TD6, had a slightly different top mounting bracket to the one in my current 2012 Westminster. The TD6 Bracket was all plastic and clipped flush around the triangle. The Westie definitely appears to have more cabling in that area, but the bracket is slightly angled and secures the triangle with a rubber strap which allows it to fit over the extra wiring behind. Maybe you need the later fitting bracket and strap too?

Rich 2012 Westminster TDV8 4.4 Indus Silver
GAP IID Bluetooth Tool

Previous Range Rovers:

2005 L322 Vogue SE TD6 Zambezi Silver
1995 P38A HSE Epsom Green
1988 Classic Vogue EFi Cassis Red
1973 Two Door Tuscan Blue

Post #684682 3rd Feb 2024 6:02pm
View user's profile Send private message View poster's gallery Reply with quote
flashheart59



Member Since: 27 Jul 2013
Location: Essex
Posts: 22

United Kingdom 2010 Range Rover Autobiography 5.0 SC V8 Galway Green

Thanks Rich, think you’ve nailed it. I’ll try to find the newer bracket, a picture would be incredibly helpful if you were able? Thumbs Up

Post #684731 4th Feb 2024 4:25pm
View user's profile Send private message View poster's gallery Reply with quote
RichTD6



Member Since: 02 Mar 2011
Location: Lincolnshire
Posts: 84

United Kingdom 2012 Range Rover Westminster TDV8 Zermatt Silver

I will do my best at the weekend when it’s light. Bear with me though as I’m not very savvy with technology and uploading a photo will be a new challenge! Laughing

Rich 2012 Westminster TDV8 4.4 Indus Silver
GAP IID Bluetooth Tool

Previous Range Rovers:

2005 L322 Vogue SE TD6 Zambezi Silver
1995 P38A HSE Epsom Green
1988 Classic Vogue EFi Cassis Red
1973 Two Door Tuscan Blue

Post #684994 7th Feb 2024 7:52pm
View user's profile Send private message View poster's gallery Reply with quote
Pawl



Member Since: 07 Nov 2017
Location: West Midlands
Posts: 688

England 2007 Range Rover Vogue TDV8 Cairns Blue

I think I remember having a similar problem when I added 1 to our car a few months after purchase.

All I did though was apply steady pressure on the wiring loom until the warning triangle would fit.
I was probably lucky that I was doing it on a relatively warm UK day, so not that much effort required.
If you're trying it on a cold day, I'd suggesting adding some heat via a hairdryer to gain some flexibility. Paul,
2001 Discovery 2 TD5, 211,000 miles & climbing
2006 FFRR TDV8 Vogue 145,000 miles & climbing
Member of Midland (Land) Rover Owners Club, www.mroc.co.uk

Post #685018 7th Feb 2024 9:32pm
View user's profile Send private message View poster's gallery Reply with quote
SamThomas



Member Since: 12 Nov 2021
Location: South East
Posts: 293

United Kingdom 2003 Range Rover Vogue Td6 Baltic Blue

stan wrote:
put the triangle in the wheel well....


Not really very helpful to the OP......

Many of us like things to be "correct" - I had the same issue and found that I just had to "tease" the wiring looms back a little with a couple of after market cable ties.

Post #685022 7th Feb 2024 9:45pm
View user's profile Send private message View poster's gallery Reply with quote
RichTD6



Member Since: 02 Mar 2011
Location: Lincolnshire
Posts: 84

United Kingdom 2012 Range Rover Westminster TDV8 Zermatt Silver

Sorry it’s taken me a while to get some photos but I have managed today.


Click image to enlarge


Click image to enlarge


Click image to enlarge


The part number appears to be LR011186 - Warning triangle bracket 2010-2012

Hope this helps.

Rich 2012 Westminster TDV8 4.4 Indus Silver
GAP IID Bluetooth Tool

Previous Range Rovers:

2005 L322 Vogue SE TD6 Zambezi Silver
1995 P38A HSE Epsom Green
1988 Classic Vogue EFi Cassis Red
1973 Two Door Tuscan Blue

Post #685871 17th Feb 2024 4:45pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site