Hello
I have such a problem with my RR L405 TDV8.
My car started consuming oil, at first I thought it was just the turbo, it has 160,000 km, but in the end it turned out that the problem would be bigger. When I disassembled the engine, it turned out that the cylinders were out of alignment by 0.2 mm, so I started to do an overhaul with cylinder grinding. The crankshaft was fine and the bearings, I noticed it early. I ordered bigger pistons and now the problem is that I don't know the ttorques for the crankshaft and piston bolts. That's why I would like to contact you here if anyone knows them. I only have torques from the 306DT but I don't know if they could be used for my engine. I don't want to buy a second engine because this one is not to be thrown away. Torque figures are nowhere to be found, not even in Autodata, but I know these engines are being repaired.
Thanks to everyone who can give me advice.

welcome to the forum..

the info you require could possibly be in the workshop manual ...download link in the wiki... ... - .- -.




Y. O. L. O.
.

No nothing info in the wiki i check it.

I found it, it was difficult, but I got it, whoever wants it, I'll tell him.

bether i give you for free

here in gallery buton..

I looked through many workshop manuals but never found these torques so well done. Where did you find them in the end?
Keep updating the thread with your progress many on here will be interested in your project  2018 SE SDV8 4.4 Byron Blue

nice find,

Click image to enlarge