Hi all, I have searched but only come up with the pre touch screen info.

How easy is it to retrofit the Land Rover reversing camera to a 2005 FFRR with touch screen system?

I sourced a used rear spoiler with the Land Rover camera built in but need to know if it is a case of ordering a cable from the dealer to plug it into the MOST system in the boot, or a nightmare of having to get into rewiring the whole car.

Any help is greatly appreciated.

Tom

tom, i asked a very well informed member whether this is possible and was told that the screen has three connectors, one for tv ,one for the venture cam and one for the reverse camera..so it is possible to connect a reverse camera and use the reversing lights to supply power but the stumbling block is changing the CCF to enable the input. enabling the CCF apparently , is not a dealer option but can be done with a faultmate or maybe autologic...

Interesting, thanks for the info, I will have to do some more digging around about configuring the CCF, don't think I am up for shelling out £1k for the equipment... I might contact BBS Spy has he seemed to be working on the configuration with the Blackbox.

no probs mate, if you do happen to figure it out let us know here..

You do need to switch on the camera in the ccf ...i have range rover software running on my nav screen in the discovery 3 and the camera is fully automatic ( when in reverse ) once enabled

as said also ..it just needs the coax cable running to the screen and plugging in the connector

Awesome news, does anyone know the best way to get it programmed without having to buy the coding equipment. I am happy to pay for the service. Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

theres proberly someone nearer ...but Pete Bell at Bell autos in York has the equiptment

He also travels to the LR shows ..so perhaps you could meet him at Billing or Peterborough

i've managed to get a pic of the back of the screen so you can see the three inputs...[top right]

If it helps, see http://www.disco3.co.uk/shop/index.php?act...oductId=34 for cables to fit the SMB sockets on the nav screen

ahh, so bare wires and chewing gum no good then..



thankyou martin.

Any one know if they are the same SMB's as used by Nokia? If so I have some right angled ones and coax to suit and can make some leads up for postage costs and forum donation.

dont think right angle ones will fit in the recess nigel..

Stan

Is ur unit out, I could send you 1 to try.

just looking at the pic i posted nigel, it has deep recesses so i dont think a right angle will fit in there..

nbunney wrote:

can make some leads up for postage costs and forum donation.