The stupidly flimsy clips on the seat valance broke after someone accidentally slid off the seat.
They had been glued before by previous owner. `I re glued them as a temp measure until I order a new valance , but I cant see how I can get the front of the valance ( the curved bit) to clip onto the plastic switch module bracket. The valance needs support at the front corner, rave has very little info.

I have a very vague memory of it just push clipping into place. Thats not much help i know.
When you order the new part it should help as you can see how it sits?
I did it about 3 years ago and it was straightforward.

I've been struggling trying to fit a new valance on and off for 2 days. I cannot get that front retaining lug to slip into place. Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

If I remember right from about 9 years ago, you sort of hook the end on, the short bit that comes round at the front. It’s fiddly as you can’t really do that easily and keep the rest of it in place where it should be. Think I bent it outwards slightly as I pushed it in, bit like you might bend a plastic school ruler….

Fiddly as hell, prob why I still remember it…

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Yep. I've tried all sorts of combinations but to no avail. Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA