Is it possible to get all the doors to open when you open the driver's door? Tried searching online and through the cars menus butt can't find anything.

Nope, not possible.

You have to settle for pressing unlock on the remote or the doors unlock button below the hazard warning light switch. 2015 Range Rover Autobiography 4.4 SDV8

Thanks for the reply mate, one of the only things I dislike about the car

If you mean when you unlock using a single press of the fob, you can change it with a diagnostic tool or similar.

If you mean when you are inside and pull the drivers door handle… don’t think so.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Ah, If it’s the unlock via fob, you can change the operation yourself, thought I’d posted something fairly recently…

https://www.fullfatrr.com/forum/topic64551.html

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Turns out it is (now) possible, so long as you ask the right question:

It turns out you CAN get rid of one of the most annoying features on this car and have the doors unlock when you turn the engine off (note it might not work on pre 2010 cars).

So, the option doesn't appear in the standard CCF list so at some point you must have been given access to the entire CCF list.

After asking GAP again but this time to be granted access to the full CCF catalogue, sure enough, the option is hidden in there.

So, anyone wanting this and with an IID needs to write to GAP and request the access then, your CCF list will appear with this new option (basically the entire catalogue and not tested to make sure it does or doesnt work on your model so, be extra careful touching anything in here):

Click image to enlarge

Click image to enlarge

Click image to enlarge

That's for the update on this mate think I'm going to have to get myself a GAP IID

Very late to the party on this one, but I have to say this is the most pleasing change that I've been able to enable so far on our 2011 L322.

Patrick was super-obliging with enabling all the CCF access on my GAP tool and bingo - we now have doors that unlock when the engine is turned off.

Happy days! 2011 Range Rover Vogue SE 4.4 TDv8

I'm trying to think of reasons why this may not be desirable but can't think of any ouside some far fetched security / crime situation. 2012 TDV8 Vogue (L322)

I'm with you on this, albeit I tend to be aware of my surroundings before switching off.

I will experiment with the locking options to see if I find the same as garyRR in that if locked with the central switch, it won't auto unlock... This could cover those rare scenarios where I am more conscious of potential dangers whilst driving although rural Surrey is generally a safe place...

It is a super pleasing, if simple, configuration change though! 2011 Range Rover Vogue SE 4.4 TDv8

It worked ideally on my car I.e. if I had intervened during the ignition cycle, it wouldn't auto unlock, as the BCM logic must tell it to cancel that action in that scenario.

But that was on a 2011, with a much newer BCM than on a 2004. 2015 Range Rover Autobiography 4.4 SDV8