![]() | Home > Maintenance & Mods (L322) > HQ Wiper Blades |
![]() ![]() |
|
|
hotpotatojr Member Since: 05 Oct 2021 Location: Blackpool Posts: 71 ![]() ![]() ![]() |
Afternoon all,
|
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35471 ![]() ![]() |
these seem to be popular on the forum,
|
||
![]() |
|
dhallworth Member Since: 10 Oct 2011 Location: Glasgow Posts: 3143 ![]() ![]() ![]() |
I swapped to the HQ ones and very quickly found them to be very poor.
|
||
![]() |
|
JayGee Member Since: 27 Jul 2021 Location: London Posts: 3283 ![]() ![]() ![]() |
Had Bosch on for a year and still streak free. Windscreen looks new which helps. 2012 TDV8 Vogue (L322) |
||
![]() |
|
bigbo Member Since: 07 Jul 2014 Location: Derbyshire Posts: 595 ![]() ![]() ![]() |
Looks like I'm the odd one out, but I have no problems with HQ blades, used them on several cars including my old Golf, my wife' MG and my SC.
|
||
![]() |
|
RichM63 Member Since: 10 Jul 2019 Location: Brittany Posts: 249 ![]() ![]() ![]() |
It took a while for it to dawn on me but, look at pic #2 in your link; (6 months driving around) That fitment is for LHD vehicles, you need to remove and reverse the center black permanent fixing on the blade so that when you attach to the car then the wide flattish wind deflector part of the blade is at the bottom and the narrow side to the top. see pic #3 in your link. HTH, Rich L322 3.6 TDV8 Vogue. 07MY ML 320 7 Seat full leather etc. (The Black Pearl) ![]() |
||
![]() |
|
4434Morrison Member Since: 02 Mar 2020 Location: Folkestone Posts: 185 ![]() ![]() ![]() |
Well spotted Rich! I wonder how many range rovers are driving around with the blades fitted the wrong way round.... If you are correct...
|
||
![]() |
|
wayneg Member Since: 05 Jun 2013 Location: South Fremantle, Australia ( ex London ) Posts: 798 ![]() ![]() ![]() |
I have just fitted a set on my car, nice and quiet and streak free. I used the same on my previous TD6 and they were still good after several years. The profile is symmetrical so they are not sided. Here is the seller.. https://www.aliexpress.com/item/3295374723...RWSIwsFXNl 2007 TDV8 VSE
|
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8362 ![]() ![]() ![]() |
Just to add to this debate...
|
||||||
![]() |
|
SamThomas Member Since: 12 Nov 2021 Location: South East Posts: 293 ![]() ![]() ![]() |
Personally, on any vehicle I have had over decades of driving, since the days of mkI Escorts with those silly 3-winged add on plastic things I have never, ever found the need for anything other than standard good quality wiper blades & arms with everything adjusted correctly, a clean screen & good quality screenwash.
|
||
![]() |
|
hotpotatojr Member Since: 05 Oct 2021 Location: Blackpool Posts: 71 ![]() ![]() ![]() |
Hi, please can you embed which pictures you're referring to? Don't know if it's just been a long working weekend but I can't figure out what you can see. I've just taken the wipers off and they are completely symmetrical on either face. Cheers Chris |
||
![]() |
|
RichM63 Member Since: 10 Jul 2019 Location: Brittany Posts: 249 ![]() ![]() ![]() |
Look at the pictures on the HQ website in this link, you will see what I mean about 'profiled/handed' blade fitment.
|
||
![]() |
|
Flashman Member Since: 05 Jun 2011 Location: Windsor & Brentwood Posts: 1228 ![]() ![]() ![]() |
Over the years after trying various blades I always came back to the Bosch 808s. Reliable and long lasting. Tom
|
||
![]() |
|
garyRR Member Since: 13 Mar 2021 Location: Hampshire Posts: 1480 ![]() ![]() |
I don't see any profiling. Aero blades are symmetrical. I tried two different sets of of aero blades from two different sellers and both of them caused the annoying buzz, which for me occurred above 63mph. 2015 Range Rover Autobiography 4.4 SDV8 |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)