Hi chaps, looking for a bit of advise. I’m looking to replace the tired and deformed rubber edge protectors of my rear wheel arches. I’ve found what I think is the correct part on the technical drawing, named seal. But having looked through loads of posts about rear arches etc, I’m under the impression that they never came with any arch protectors/seals? Just wondering if anyone knows if the part I’ve highlighted is the actually part I’m looking to replace? If not, where can I get those seals.

Thanks

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

You won’t find them as a part for the L322 as they were never fitted from the factory.

I fitted LR ones to my TD6 and my current car. I went to the dealer and he came out with different lengths, and I chose what I wanted. I did 4 bits as I wanted to cover all of it.

A few years after, they started to rust themselves and go like yours have started to. This is because there is a metal strip in them.

I pulled them off and replaced with plastic door edge protector…. But it’s not quite wide enough for my liking.

I did a post with the LR strips on.

Let me have a search…

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

This is page 2 of it… has part numbers and pics, from my previous RR…

https://www.fullfatrr.com/forum/topic9387-15.html

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

I made my own one piece ones from some rubber I got from Amazon.
They meet the door when it is shut and are nice and smooth.

Click image to enlarge

that kink you did kevinp is cool. what did you use to seal / glue it?

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Hi Greg, I just used some screwfix super glue.
Google search, 'TMH large u section rubber seal 21mmx8mm'.
£3.15 a metre X 2.
Cheers Kev.

mjdronfield wrote:

You won’t find them as a part for the L322 as they were never fitted from the factory.

I fitted LR ones to my TD6 and my current car. I went to the dealer and he came out with different lengths, and I chose what I wanted. I did 4 bits as I wanted to cover all of it.

A few years after, they started to rust themselves and go like yours have started to. This is because there is a metal strip in them.

I pulled them off and replaced with plastic door edge protector…. But it’s not quite wide enough for my liking.

I did a post with the LR strips on.

Let me have a search…

Perfect mate, that’s exactly what I’m looking for!

I think I have 4 of the free lander ones in the garage and as I have sold the car I have no use for them.

Free to anybody that can use them.

Ian

Free ones gone.

Ian

The stuff Kevinp posted looks good, I will get some. Have you seen the below video, not sure about the use a vaseline but I bought the freelander strips to use. Now thinking I'll just got for the 8x21 channel



Best,

Tom