Andy wrote:

I have the 2010 3.6 with the sliding TRW calipers. I’m trying to order a set of brake pads and discs for the fronts but without taking the wheel off, I can’t tell if it’s 344mm or 360mm discs. I’ve offered up a tape measure but it’s difficult through the wheel.
Can anyone advise?

Call Paul Redding at site sponsor Advanced Factors and he'll sort it all. Just needs your rego and/or VIN  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Advances motor factors do great kits for all budgets but all are good but some better than oe. On his Web page select aa on chasis and all will be revealed

Just an update to help anyone in future. Meyle have just got back to me and confirmed that the metal lump riveted on to pad should in fact be fitted to ouboard side of disc.

could you post a pic, if possible