Three things needed here:-

1. name of the two plastic pieces either side of the gear lever console, one with a hole for the ignition key
2. part number,
3. instructions on how to fit the new ones.

Both of mine are very shabby and the key hole side is about to break across the key hole.

Thanks

Wil this help?
If not its possible to search via your VIN in the main home page

[url] https://partsouq.com/en/catalog/genuine/un...p;q=[/url]

I have the same year as you and I've had that panel out a few months ago. I can't recall the two pieces you mention.

Click image to enlarge

Thanks, Rip Bucko. It's the right place but I'm after the bits either side of 13752A, the right hand side one with the hole for the ignition key.

Got it!!
it's part number is FJV500180PVA, but it's not made any more, so I'm looking for used one.

Thanks all for your kindness

Ahh, this piece - it's a single piece, not 2 pieces. That's what confused me. (Image from roversland.com)

 Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

Yes. Confused me too.

Now I need to find a second-hand one

ebay. 'centre console Range Rover 2002'. you'll find one quite cheap im sure.