Originally, my RR was equipped with the LR008766:


But when I bought it, it was on a silver variant of VPLMW0061:


which are quite beat up now. I also had to replace them with the 19" LR013925 temporarily as the tyres on the 20" started delaminating (the car was shaking when driving at speeds between 15km/h-80km/h and having replaced/reconditioned most of the suspension I finally figured it was the tyres).

I'm now considering buying a set of new rims and I'm trying to choose between the original LR008766 and the dark grey variant of VPLMW0061, which I rather like (pictured below):


The advantages of the VPLMW0061 are: 1) weight - 16kg vs. 40kg LR008766; 2) price - £120 vs. £420 for LR008766.

However, it's those advantages that concern me - my worry is they might be not as tough as LR008766.

I would appreciate if anyone could share their experience with any of these rims and thoughts on the matter as well.

Thanks!

Are those 6 spoke wheels genuine?

At less than half the weight of the genuine one's I'd say they were a bit suspicious. 2021 D350 Fifty Edition - Carpathian Grey
2017 4.4 SDV8 Autobiography (2021-2024) - Santorini Black
2012 4.4 TDV8 Westminster (2016-2021) - Santorini Black

I can't see a 20" alloy weighing 40kg really.

Agreed. And it doesn't. According to LR it weighs 18Kg. The VPLM0061 is actually 170grams heavier

Rob99 wrote:

Are those 6 spoke wheels genuine?

At less than half the weight of the genuine one's I'd say they were a bit suspicious.

Bl4ckD0g wrote:

Agreed. And it doesn't. According to LR it weighs 18Kg. The VPLM0061 is actually 170grams heavier

8766.

My favourite wheel on a 322. Nice though the 5 spokes are I’ve always liked the Vspoke.

Had them in smoked chrome/anthracite on my old 322.

 There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Hi,
original twin spoke design for me as well and always oem

Do you not get used wheels come available, dont think I would buy new wheels

I like the 0061's ..... and not so many about (was going to say not as common - but that could be taken 2 ways LOL).

At the end of the day it's your car and your choice - which wheel design will make your FF feel most special?

These are mine, the dealer had just refurbed them when I bought the FF, said it cost him £300.
 Anything can be made to work if you fiddle with it long enough (and have deep pockets|)
Current cars, 2011 FF 4.4 TVD8; Audit TT 1.8T convertible.

0061 for me all day long, a nice wheel and easy too clean and the diamond cut gives them a nice touch.

I'm particularly fond of the 0061's too....

I recently had mine refurbished, I toyed with having them finished in the anthracite with the diamond cut detailing, but in the end I opted for just having the whole thing painted in silver... Diamond cut finish is an utter nightmare imho, I've had a few cars over the years that have had wheels finished this way and they all suffer horrendously with 'white worm' corrosion...


 Andrew.

RiverBlanche wrote:

Hi,
original twin spoke design for me as well and always oem

Do you not get used wheels come available, dont think I would buy new wheels

northernmonkeyjones wrote:

8766.

My favourite wheel on a 322. Nice though the 5 spokes are I’ve always liked the Vspoke.

Had them in smoked chrome/anthracite on my old 322.

Treebor99 wrote:

I like the 0061's ..... and not so many about (was going to say not as common - but that could be taken 2 ways LOL).

At the end of the day it's your car and your choice - which wheel design will make your FF feel most special?

These are mine, the dealer had just refurbed them when I bought the FF, said it cost him £300.

rainking wrote:

I know what you are talking about. But with the salt on our roads, the corrosion kicks in in about 5 years regardless of the finish, especially around centre caps.