![]() | Home > Technical (L322) > Turbo Actuator, Turbo boost control solenoid |
![]() ![]() |
|
|
Jayk69 Member Since: 08 Feb 2018 Location: Daventry Posts: 601 ![]() ![]() ![]() |
hey model and engine would be good so we can help 2012 Vogue 4.4 TDV8 - Current
|
||
![]() |
|
rjff Member Since: 28 Oct 2017 Location: Cambridgeshire Posts: 1196 ![]() ![]() ![]() |
And perhaps a lot more on the background as to why would help, which all are happy to do. |
||
![]() |
|
Ikorodu Member Since: 19 Feb 2021 Location: Kent Posts: 5 ![]() ![]() ![]() |
Oops!!
|
||
![]() |
|
rjff Member Since: 28 Oct 2017 Location: Cambridgeshire Posts: 1196 ![]() ![]() ![]() |
I'll happily go down in flames!!!!
|
||
![]() |
|
GraemeS Member Since: 07 Mar 2015 Location: Wagga area Posts: 2366 ![]() ![]() ![]() |
Was just the belt changed or were the pulleys also changed? Initial squeaking or squealing suggests dry pulley bearings.
|
||
![]() |
|
Fox889 Member Since: 04 Jun 2019 Location: Bury St Edmunds. Suffolk Posts: 671 ![]() ![]() ![]() |
There is no chassis to lift the body off unless you have a Sport [think I'm correct?].
|
||
![]() |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3734 ![]() ![]() ![]() |
http://www.fullfatrr.com/gallery/albums/us..._TOPIx.pdf
|
||
![]() |
|
Ikorodu Member Since: 19 Feb 2021 Location: Kent Posts: 5 ![]() ![]() ![]() |
Thanks for the help/tips Guys
|
||
![]() |
|
GGDR Member Since: 26 Nov 2016 Location: London Posts: 3521 ![]() ![]() ![]() |
Are you in restricted performance?
|
||
![]() |
|
GraemeS Member Since: 07 Mar 2015 Location: Wagga area Posts: 2366 ![]() ![]() ![]() |
Lubricant isn't applied to the pulleys which use a so-called sealed bearing. |
||
![]() |
|
Ikorodu Member Since: 19 Feb 2021 Location: Kent Posts: 5 ![]() ![]() ![]() |
@GGDR thanks, will check them all and share my findings
|
||
![]() |
|
GraemeS Member Since: 07 Mar 2015 Location: Wagga area Posts: 2366 ![]() ![]() ![]() |
Be ready to spray water onto the belt to see if the noise stops. If it stops then the belt is very likely the culprit. |
||
![]() |
|
Fox889 Member Since: 04 Jun 2019 Location: Bury St Edmunds. Suffolk Posts: 671 ![]() ![]() ![]() |
Another way to prove or eliminate 'belt squeal' is do what my Indy did........dived into his tool box and came out with a container of...........Johnsons Baby powder! [other similar makes are available]. He squirted this on the belt, fired her up & quietness. You can always buy expensive 'anti squeal' spray but this stuff absorbs any moisture [cause of the squeal] and after cleaning off any powder, all sorted! |
||
![]() |
|
dennij Member Since: 24 Feb 2019 Location: Up North Posts: 450 ![]() ![]() ![]() |
I bet it smelt nice too |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)