DrRob wrote:

So, who else has now fitted their LED upgrades?
Fox, Paul, Bradders, Rob???
Brian?

Fitted most of them today just got puddle lights to do as rain stopped play. They make a huge difference and very easy to fit. Had a bit of an issue with fitting the map reading bulbs as two wouldn't work, swapped them with a known working o e still didn't work, scratched my head for a bit and then decided to try turning the buln 180 degrees put it in and worked straight away. Looked at the glove box light and thought the effort to change vs reward of a bit more light in something I never open was not worth it  2008 TDV8

Nice one
Same Amazon kit I used?
Yes, forget glove box. Too much faff. Eats into beer time  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

I'd be interested to see how the amazon kit goes....

I bought the ebay kit in Feb, one of the T10 bulbs started flickering last month which they replaced very rapidly with an extra one. Last week one of the "knee" lights started flickering , and today a third one ......

Don't hold out much hope I'm afraid.

Please let us know how you get on.

Maccaa Current FF Westminster 4.4 V8

Will do. Not being used at all due to WFH but time will tell  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Just a quick update on my LED replacement bulbs.

I bought the ones off eBay and I have now replaced the "knee" lights, the front and rear interior illuminated lights and both of the lights in the tailgate because all were flickering! i noted when removing them they were incredibly hot, I'm not sure if they just overheating, the other t10 led bulbs are still working fine. I assume that they don't get hot because they are only on briefly.

I have replaced the flickering bulbs with those similar to Dr Rob's as its a different design. i will update this post when the new led's have been in for a while. Current FF Westminster 4.4 V8

I’ve just fitted the kit suggested by Dr Rob and it looks great - I’m well chuffed.

Does anyone know of a decent led replacement for the reversing lights, now I’m thinking they could do with an upgrade?

Cheers

DrRob contribution again..

https://www.fullfatrr.com/forum/topic55944...6c2615d67c ... - .- -.




Y. O. L. O.
.

I need to be on commission
“If you can’t share knowledge then what’s the point of living.” DrRob (2020)  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Always grateful when someone else does the heavy lifting

Cheers fellas

confused - i have purchased the LED kit pictured on the first post. Looking at the video the first bulbs he replaces are the front centre ceiling consol ones. But the bulbs are missing from the KIT !! what are they called as i now have to purchase separately  2010 3.6 TDV8 Vogue

Licence plate bulbs have failed. Gone back to old skool ones.
Might hunt for replacements  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

ABY wrote:

confused - i have purchased the LED kit pictured on the first post. Looking at the video the first bulbs he replaces are the front centre ceiling consol ones. But the bulbs are missing from the KIT !! what are they called as i now have to purchase separately

I think they are in the kit, just not looking the same? Perhaps fit all the others and see what is left. 2010 Range Rover TDV8 Baltic Blue Autobiography (2011 MY) - SOLD
1960 Land Rover SII SWB SW
2020 BMW R1250 RT LE
2021 Triton ST-125 (Monkey Bike)

Use the ones that look like lollipops  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

DrRob wrote:

Might hunt for replacements

https://www.powerfuluk.com/vehicles/range-...b-kit.html
Whatever route I choose I’ll do the CCF update - see end of video

&feature=share Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

DrRob wrote:

Licence plate bulbs have failed. Gone back to old skool ones.
Might hunt for replacements

Non LED bulbs will make the number plate harder to read - Result!  2010 Range Rover TDV8 Baltic Blue Autobiography (2011 MY) - SOLD
1960 Land Rover SII SWB SW
2020 BMW R1250 RT LE
2021 Triton ST-125 (Monkey Bike)